Material High-grade, corrosion-resistant Length Customizable, up to 10 meters Connector Type Standard Bently Nevada connector (compatible with 3300 XL NSv series) Temperature Range -40°C to +85°C Operating Voltage 12V DC
Main Module Operating Temp -30°C to +65°C (-22°F to +150°F) Main Module Storage Temp -40°C to +85°C (-40°F to +185°F) I/O Module Operating Temp 0°C to +65°C (+32°F to +150°F) I/O Module Storage Temp -40°C to +85°C (-40°F to +185°F) Humidity 95% non-condensing
Series 3500 Product Type Proximitor Seismic Monitor Module Dimensions 241.3 mm × 24.4 mm × 241.8 mm Weight 0.91 kg (2.0 lbs) Radiated Emissions EN 55011, Class A Conducted Emissions EN 55011, Class A
Operating Temperature -30°C to +65°C (-22°F to +150°F) Storage Temperature -40°C to +85°C (-40°F to +185°F) Humidity 95% non-condensing Contact Rating 5 A @ 24 Vdc or 120 Vac Arc Suppressor 250 Vrms (standard) Operation Mode Selectable Normally De-energized/Energized
Power Consumption 5.8 W (typical) Input Signal Range +10.0 V to -24.0 V Full Scale Range Up to 99,999 rpm RPM/Min Accuracy ±20 rpm/min Transducer Power Supply -24 Vdc, 40 mA max per channel Output Impedance 550 Ω Voltage Compliance 0 to +12 Vdc across 0-600 Ω load
Manufacturer Bently Nevada Product No. 135813-01 Product Type 3500/93 Display Interface I/O Module Origin Made in U.S.A Additional Certification Certificate Of Origin (COO) available
Part Number 330881-16-00-175-00-02 Manufacturer Bently Nevada Product Type Proximity Transducer Operating Temperature -35°C to +85°C Storage Temperature -51°C to +100°C Country of Manufacture USA (United States)
Operating Temperature -40°C to +125°C Sensitivity 8.5 mV/µm Frequency Response 0 – 10 kHz Impedance 10 ohms Maximum Cable Length 9 meters Weight Approx. 0.014 Kg to 0.15 Kg
Model Number 330101-00-47-10-02-00 Type Proximity Transducer System Measurement Type 8 mm displacement measurement Operating Temperature Range -40°C to +120°C Sensitivity 0.1 mV/mil Frequency Range DC to 10 kHz
Brand ABB Model D2D160-CE02-16 Fan Type Frequency Converter Dedicated Fan Voltage 220V Frequency 50Hz Air Flow 16 m³/min Dimensions 160mm × 160mm × 50mm Protection Rating IP54 Noise Level ≤55 dB(A)
Programming STEP 7 V5.5 or higher with HSP 262 Power Supply Via system power supply Current (5V DC) 1.3 A (typ.), 1.6 A (max.) Power Loss 6.5 W (typ.), 8 W (max.) Work Memory 4 MB total (2 MB program, 2 MB data)
Dimensions 10.2 cm × 27.9 cm × 7.6 cm Weight approx. 1.2 kg Number of Relay Channels 8 channels (typical) Relay Contact Configuration SPDT (Single Pole Double Throw) Nominal Coil Voltage 24 V DC
Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Humidity Tolerance 5%-95% non-condensing Dimensions (W×H×D) 198 × 261 × 20 mm Weight 0.55 kg
Trust Guaranteed
Customer Support
IPv6 network supported