Installation Design High-density DIN-rail or panel Replacement Compatibility 3300 RAM, 3000/7000-Series 190 Transducer Systems Average Scale Factor 7.87 V/mm (200 mV/mil) Probe Compatibility 3300 RAM or 3300 NSv Proximity Probe + Extension Cable Power Voltage -17.5 Vdc to -26 Vdc
Protection Rating IP20 (UL Open Type) common, up to IP55 / IP66/67/UL Type 4X for harsh environments Control Modes DTC (Direct Torque Control), V/Hz, Vector Control Overload Capacity Heavy-duty: 150% rated current (1 min / 5 min) Light-duty: 110% rated current Input Frequency 50/60 Hz ±5% Ambient Temperature -10°C to +40°C (or higher, model-dependent)
Input Channels 8 single-ended Signal Range 4-20 mA (1-23 mA full range) Accuracy ±0.1% of span Resolution 16-bit Isolation 100 V AC (channel to Rollbus)
Rated Voltage 24 V DC Signal "0" Range -30 to +5 V Signal "1" Range 13 to 30 V Input Delay ("0" to "1") 3 ms (max.) Supply Voltage 24 V DC (L1+, LS+) Permissible Range 18.5 V to 30.2 V DC
Dimensions 340 mm (width) x 242 mm (height) x 57 mm (depth) Weight 2.6 kg Power Supply +24 V DC (18 to 32 VDC) Operating Temperature -10°C to +60°C Protection Front casing designed to withstand wet, dusty, and demanding environments
Maximum Field Cable Length 600 meters (656 yards) Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V a.c. Power Dissipation Typ. 2.1 W Current Consumption (+5 V Modulebus) 80 mA
Processor Type High-performance embedded processor I/O Expansion Capability Supports 14 to 384 I/O points, flexibly configurable according to requirements Operating Temperature Range 0°C to 55°C Protection Level IP55 (suitable for harsh industrial environments) Communication Interface & Protocols Multiple industrial protocols including Ethernet, Profibus, Modbus
Rated Input 0~20 kA AC Rated Output 0~20 mA DC, 0~5 V DC, 4~20 mA DC Accuracy Level 1.0 Linear Range 0~120% Isolation Withstand Voltage 5000 V DC / 1 minute Auxiliary Power Supply +12 V DC, ±12 V DC, +24 V DC Operating Temperature -20℃ ~ +60℃ Temperature Drift < 300 ppm/℃
Communication Interface RS485, Ethernet Input/Output Channels Optimized for High Volume Environmental Rating Industrial Grade Operating Temperature -20°C to +60°C Storage Temperature -40°C to +85°C
Product ID PCD237A101 Weight 0.4 kg Dimensions (D x H x W) 250 x 30 x 110 mm Compatibility Compatible with ABB PLC systems Input/Output Channels Up to 16 channels
Operating Range Up to 10 mm Detection Distance 8 mm Inductive Coupling Type Linear Material Stainless Steel Temperature Range -40°C to +150°C Electrical Rating Continuous DC voltage up to 30 V Environment Resistance IP67 rated for dust and water resistance Wire Gauge 22 AWG
Armor and Cable Option (25) Armored High Temperature FluidLoc cable Agency Approval Option (00) No Approvals Extension Cable Material 75 ohm triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc cable Extension Cable Capacitance 69.9 pF/m (21.3 pF/ft) typical Operating and Storage Temperature -35°C to +200°C (-31°F to +392°F)
Product Model 990 Transmitter Key Feature Integrated Proximitor Sensor (requires no external unit) Signal Output Non-isolated "PROX OUT" and "COM" terminals plus a coaxial connector for dynamic vibration and gap voltage signal output Configuration Non-interacting zero and span potentiometers under the label for loop adjustment Diagnostic Feature Test Input pin for quick loop signal verification using a function generator
Unthreaded Length 0.0 in Overall Case Length 3.0 in Total Length 1.0 m (3.3 ft) Connector and Cable-Type Miniature Coaxial ClickLoc Connector, Standard Cable Agency Approval Multiple Approvals
Model 330101-00-71-05-01-05 Series 3300 XL Probe Diameter 8 mm Probe Length 1.0 meter standard Cable Type Integral cable with ClickLoc® keyed connector Operating Temperature Range -40°C to +120°C Vibration Range Up to 50 g, peak
Trust Guaranteed
Customer Support
IPv6 network supported