|
GE
UNIVERSAL RELAY INPUT |
SENSITIVE-GROUND CT / VT MODULE
UR8MHGE Multilin Universal Relay Option 8M
GE Multilin UR8MH is the 8M CT/VT input option for compatible Universal Relay platforms. Four CT channels and four VT channels condition instrument-transformer secondary signals for relay protection, metering and supervision, with a sensitive-ground arrangement and enhanced diagnostics.
Sales manager: Miya zheng | sales@amikon.cn | WhatsApp: 86-18020776792
|
|
||||||||
|
01
TECHNICAL DEPTH
|
UR8MH Matching Matrix
|
| 01 Site CTs and VTs | Instrument transformers reproduce the power-system current and voltage at safe secondary levels. Ratio, polarity, grounding and secondary ratings establish the measurement basis. |
| 02 UR8MH | The four CT and four VT channels condition the connected secondary signals. The sensitive-ground path supports lower-level ground-current measurement. |
| 03 Host UR Relay | The relay firmware applies scaling, metering, protection elements, event recording and diagnostics. Compatibility must therefore be checked at module, slot, relay and firmware level. |
|
AMIKON SUPPLY SERVICE
Twenty Years Supporting Industrial Automation
Fast response, careful part matching and coordinated global delivery help industrial buyers reduce the disruption created by urgent or difficult replacement requirements.
|
Inspection and matching support |
| Coordinated inventory and delivery |
| Q1 |
Can GE Multilin UR8MH replace another UR 8-series CT/VT option directly?
Do not approve a substitution from the short module code alone. Options such as 8L, 8M, 8N and 8R can differ in current-input arrangement, ground-current sensitivity and diagnostic capability. Match the complete host-relay order code, slot assignment, CT secondary rating, VT secondary voltage, firmware and terminal wiring before replacement.
|
| Q2 |
Which host-relay details are required before purchasing GE Multilin UR8MH?
Provide the full front-label order code, relay family and function, chassis generation, installed slot, existing module code, firmware revision and clear photographs of both the module label and rear terminals. These checks reduce the risk of an electrically correct module that is not accepted by the installed relay configuration.
|
| Q3 |
Why is the sensitive-ground input important when selecting GE Multilin UR8MH?
The sensitive-ground channel is intended for lower-level residual or ground-current measurement than a standard phase-current channel. The site CT ratio, wiring method and configured protection pickup must remain coordinated. A mismatch can reduce measurement resolution or produce incorrect ground-protection behavior.
|
| Q4 |
What electrical values must be checked for GE Multilin UR8MH?
Confirm CT secondary rating and ratio, VT secondary voltage and ratio, system frequency, phase sequence, polarity, grounding practice and terminal assignment. Also verify that the connected transformer circuits remain within the input capability of the host Universal Relay.
|
| Q5 |
What precautions apply before removing GE Multilin UR8MH?
Isolate the relay from service according to the site switching procedure, secure and short CT secondary circuits before opening them, isolate VT circuits, record terminal positions and preserve the existing relay settings. Never leave an energized CT secondary open-circuited.
|
| Q6 |
How should GE Multilin UR8MH be commissioned after installation?
Confirm module recognition and diagnostic status first. Then verify channel scaling, phase order and polarity with controlled secondary injection. Test each current and voltage channel, the sensitive-ground path, metering values and the affected protection elements before returning the relay to service.
|
| UT55A-001-11-00 | IC695RMX128 | M60020416 |
| 195-6125 | SS-4SKPS4 | T6861H2WB-M |
| PR6424/006-030 | IC200PNS002-AB | VBN2BLSA1001 |
| IC694ALG390C | KJ4110X1-BA1 | AIP830-101 |
| F3236 984323602 | 51453322-001 | A1BR4D-05 |
| PR9268/601-000 | 509-AOA | 2ECR2-316 |
| 716F-K8 | XL31K5A4-20 | 71E86 |
| 80190-480-01-R | C98043-A7105-L4-9 | 24583-03 |
| FCU-SV02 | STHWCB30 | 9905-969 |
| KPS-600/20-ESC | ESC-PLATINE | C437D |
| 00-128-456 | Tricon 4329 | 602003746RK |
| 1492-SPM2C050 | HMCP003ADC | PLX51-HART-4I |
| IC694MDL645E | MVME172-263 | IC695CPE310 |
| 150-A24NBD | 3HAC029032-004 | 2071-A15 |
| 330180-51-00 | 80190-478-51 | ANT502-50 |
| SD4EMI | RSC-32-6AC240 | PR6424/00A-110 |
Send the complete relay order code, firmware revision, installed slot, existing module label, CT and VT ratings, terminal photographs, quantity and delivery target.
SEND UR8MH REQUIREMENT
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported