BRAND YOKOGAWA Model Number ATB5S-00 S2 Descripution The Yokogawa ATB5S-00 S2 is a 32-channel pressure clamp terminal block designed for Yokogawa control systems. It features 32 channels, a pressure clamp design, and an approximate weight of 1.9 kg.
BRAND YOKOGAWA Model Number SAI143-S63 Descripution The Yokogawa SAI143-S63 is an analog input module featuring 4 to 20 mA signal support, dual-redundancy capability, and use in CENTUM control systems.
BRAND YOKOGAWA Model Number AMM12 S3 Descripution The Yokogawa AMM12 S3 is an industrial Voltage Input Multiplexer Module utilized primarily within Yokogawa's legacy Distributed Control Systems (DCS), including the Centum CS, Centum VP, and CS3000 platforms.
BRAND YOKOGAWA Model Number MX3*D Descripution The Yokogawa MX3*D is an isolating multiplexer and I/O card used in industrial automation systems like the CENTUM VP distributed control system. It manages low-level mV and thermocouple input signals with built-in electrical isolation.
BRAND YOKOGAWA Model Number DX11*A Descripution The Yokogawa DX11*A is a duplex control card used in industrial automation and distributed control systems (DCS). It handles redundant control and high-speed information exchange between central processing units (CPUs).
BRAND YOKOGAWA Model Number ADV151-E50 S2 Descripution The Yokogawa ADV151-E50 S2 is a Digital Input Module designed for industrial automation within the Yokogawa CENTUM VP and CENTUM CS 3000 Distributed Control Systems (DCS). It is built specifically for Field Control Stations (FCS) utilizing FIO (Field I/O) architecture.
BRAND YOKOGAWA Model Number ASS9981DE-02 Descripution The Yokogawa ASS9981DE-02 is an industrial interface unit and backplane slot rack for use in Yokogawa control systems. It processes input and output signals to securely connect field sensors and devices.
BRAND YOKOGAWA Model Number ALR121-S51 S1 Descripution Serial Communication Module Parity Check None / Even / Odd Lag Time After Data Transmission 1 ms
BRAND YOKOGAWA Model Number PS31*A Descripution The PS31*A is an I/O rack power supply card engineered by Yokogawa Electric Corporation to power CPU modules and I/O components within control racks. It reliably converts incoming AC power into highly stable, low-voltage DC power required for demanding industrial automation setups.
BRAND YOKOGAWA Model Number ANB10D-S1 Descripution The Yokogawa ANB10D-S1 is a Node Unit for Dual-Redundant ESB Bus designed for Yokogawa Electric Corporation's CENTUM VP Distributed Control Systems (DCS). It acts as a rugged remote I/O chassis, linking Field Control Units (FCUs) with various I/O modules over a copper ESB bus network. The "S1" suffix designates the specific hardware style category (Style 1) from the manufacturer.
BRAND YOKOGAWA Model Number S9400UK Descripution Battery Pack Nominal Voltage 6 V DC Capacity 3000 mAh Application Backup battery for Yokogawa DCS System Processor Physical Weight 0.35kg
BRAND YOKOGAWA Model Number AAM50 Descripution Current Output Module Output Signal 4 to 20 mA DC Output Resistance 500 kΩ or more Weight 0.08kg Dimension 16.6x5.8x1.1cm
BRAND YOKOGAWA Model Number AAI141-S00 Descripution Analog Input Module Number of input channels 16, non-isolated External connection Pressure clamp terminal, KS cable, MIL connector cable Weight 0.28kg Dimension 3.3x10.7x13cm
Trust Guaranteed
Customer Support
IPv6 network supported