
|
02
CORE FEATURES
|
◆ Established CPU5200 platform
5466-1245 is part of the CPU5200 generation used across MicroNet Plus control architectures. ◆ Enhanced-performance footprint
The part is designated by Woodward as a CPU5200 enhanced-performance MicroNet Plus module. ◆ Application continuity consideration
Replacement decisions should consider the installed application, CPU revision, engineering environment and chassis arrangement rather than treating the module as a generic plug-in CPU. ◆ Engineering compatibility
Woodward's current technical lifecycle material associates 5466-1245 with Coder 6.00-4+ and MicroNet 1.0x+ environments. |
| Manufacturer | Woodward |
| Part Number | 5466-1245 |
| Product Family | MicroNet Plus |
| Processor Family | CPU5200 |
| Performance Designation | Enhanced Performance |
| Main Rack Position | Slot A1 |
| Chassis Architecture | 8-slot or 14-slot VME chassis |
| System Arrangement | Simplex / Redundant MicroNet Plus configurations |
| Engineering Environment | Woodward GAP Coder 6.00-4+ / MicroNet 1.0x+ associated environment |
| Operating Temperature | 0°C to +55°C (+32°F to +131°F) |
| Storage Temperature | −20°C to +45°C (−4°F to +113°F) |
|
04
SERIES
|
MicroNet Plus CPU FamilyThe MicroNet Plus CPU family contains several CPU generations and configurations. The correct choice depends on the installed control architecture, software environment, redundancy arrangement, cybersecurity configuration and the required replacement path.
Selection note: A CPU from the same family is not automatically interchangeable. For a 5466-1245 replacement, verify the installed CPU revision, application environment, chassis arrangement, redundancy requirement and associated communication architecture before ordering.
|
|
◈ Existing MicroNet Plus CPU Replacement
The 5466-1245 is particularly relevant when an installed MicroNet Plus system already uses the CPU5200 family and a compatible replacement is required. Matching the existing hardware and application environment is critical. |
◇ Control System Continuity
When a CPU failure interrupts an operating control system, the practical priority is an exact hardware and software compatibility check rather than selecting a CPU solely by processor family. |
|
△ Legacy System Maintenance
Woodward's lifecycle status makes planning important for installed 5466-1245 systems. The part is marked non-preferred, while Woodward's published lifecycle notice gives an approximate inactive date of 2027. |
✦ Replacement Verification
Before placing an order, confirm the exact part number, CPU revision, existing application, engineering-tool environment and rack configuration. This helps avoid receiving a physically similar module that does not match the installed system. |
|
SALES MANAGER
Miya zheng
✉ sales@amikon.cn ☎ WhatsApp · 86-18020776792
Delivery: 3–5 days
Warranty: 12 months
Packaging: Brand New
|
QUOTATION CHECKLIST
To help us verify availability and prepare a precise quotation, please include:
Delivery way: E-packing / FedEx / EMS / TNT / DHL / UPS
Payment term: T/T
|
|
↺
RETURN CARE
|
Please contact us within 7 days if you have any question after receiving the items. Returned items should remain in their original condition and include the specific reason for the return. After the returned items are received and checked, we will arrange the applicable return or replacement for the order. The buyer is responsible for shipping costs incurred in connection with the return. |
|
Q1 · Is 5466-1245 still a practical spare choice for an installed MicroNet Plus system?
It can be relevant for maintaining an existing compatible CPU5200-based MicroNet Plus installation, but lifecycle status should be considered. Woodward currently lists 5466-1245 as non-preferred and gives an approximate inactive date of 2027. For a maintenance purchase, confirming the exact installed CPU and system configuration is important before committing to a replacement. |
Q2 · Can 5466-1245 replace another MicroNet Plus CPU simply because both are CPU5200 modules?
Not automatically. CPU5200 family membership alone does not establish interchangeability. The exact part number, revision, application environment, redundancy arrangement, rack configuration and engineering environment need to match the requirements of the installed system. |
|
Q3 · What should be checked before ordering 5466-1245 for a failed CPU?
Confirm the complete part number, CPU revision, installed chassis type, CPU position, application environment, redundancy arrangement and engineering-tool compatibility. If the existing system uses a specific MicroNet Plus application, the saved application and configuration should also be considered during replacement planning. |
Q4 · Does the 5466-1245 lifecycle status affect long-term maintenance planning?
Yes. Woodward's published lifecycle notice identifies 5466-1245 as a non-preferred CPU and gives an approximate inactive date of 2027. For facilities depending on this CPU generation, maintaining a spare strategy and evaluating the appropriate future control-system path can reduce the risk of an unplanned hardware shortage. |
|
Q5 · Why should the 5466-1245 engineering environment be checked when sourcing a replacement?
The 5466-1245 is associated with Woodward GAP Coder 6.00-4+ and MicroNet 1.0x+ environments. A replacement CPU is therefore not only a hardware decision; the engineering environment and installed application must also be compatible with the CPU configuration being restored. |
|
![]() |
INDUSTRIAL PARTS WITHOUT THE WAIT
Amikon supports manufacturers by sourcing essential automation components that can be difficult to locate, helping maintenance teams control downtime, restore equipment performance and extend the usable life of installed automation systems. Worldwide delivery · Multi-brand sourcing · Maintenance-focused service
|
![]() |
||||
![]() |
|
|||||
The following models cover a broad range of industrial automation applications and are presented as additional sourcing options.
| 6ES7417-4HL04-0AB0 | FX2N-4DA | OPS3100.1 | IC695CPU310-FS | AS630F-03-10S |
| 6ES7138-4CB11-0AB0 | MM432 | IC754VSI12CTD | DI435 | 6GK7542-5FX00-0XE0 |
| AS1201FG-M5-06S | 1768-L45 | DO435 | 6ES7153-2BA82-0XB0 | GT2-P12F |
| 31F781.9 | 6ES7341-1CH01-0AE0 | AC1401 | 7DI439.7 | 6ES7193-4CD30-0AA0 |
| QD75P4N | EX270 | 6ES7953-8LL31-0AA0 | LR-ZB250AN | AF101 |
| 6GK1503-3CC00 | MS2-H50 | 7DO435.7 | 6ES7134-4NB01-0AB0 | ITV3050-044L |
| 3XP152.60-1 | IC754VSF12CTD | 6ES7151-3AA22-0AB0 | DI439 | FD-AL11 |
| 6ES7288-3AM03-0AA0 | 4E0021.01-590 | AS2201F-01-F06S | 6ES7336-4GE00-0AB0 | GT-A10 |
| PS1200 | 6ES7417-4HL04-0AB0 | ZX-TDS04T | 1769-IF4 | AC1402 |
| 7D1435.7 | 6ES7158-3AD10-0XA0 | IS600PT021I-C | ZX-TDS10T | 7DI435.7 |
| 6AV6542-0AC15-2AX0 | 7ES? | 3XP152.60-2 | 6ES7138-4NB51-0AB0 | 7DI435.7 |
| 6GK7343-1CX10-0XE0 | DM435 | GT2-P12F | 6ES7153-1AA03-0XB0 | 0PS3100.1 |
| 6ES7972-0CB35-0XA0 | 6AV6545-0CA10-0AX0 | AS2201F-01-F06S | DO435 | 6ES7138-4NB51-0AB0 |



Inventory Products


More than 40.000.000 products available and worldwide support