| AMIKON LIMITED |
INDUSTRIAL AUTOMATION SOLUTIONS |
INTERNATIONAL DELIVERY ON THE DAY
Industrial Automation Parts for Critical Control Systems
Quick Response Support | Intercontinental Cooperation Network
AMIKON LIMITED
TECHNICAL INSIGHT / GE PACSYSTEMS RX3i
| CONTROL ENGINEERING |
ANALOG OUTPUT MODULE |
PACSystems RX3i · Analog Output
AMIKON LIMITED
GE IC695ALG708 · Eight-channel configurable analog output module
THE SIGNAL CONNECTION
Reliable process control depends on more than the decisions made inside a controller. Those decisions must reach field equipment as accurate, usable signals.
In an automated plant, a controller may calculate a valve position, adjust a drive reference or regulate a process variable. The command becomes useful only when it is delivered to the connected device in the correct electrical form. This is where an analog output module plays an important role.
The GE IC695ALG708 is an eight-channel analog output module for the PACSystems RX3i platform. It provides configurable voltage and current outputs, giving engineers options for connecting controller logic with different types of field equipment.
|
01
|
One Module, Two Signal Types
A key feature of the IC695ALG708 is its support for both current and voltage output ranges. Each of its eight output channels can be configured for the required signal type and range. This gives engineers options when connecting different analog devices within an RX3i control architecture.
|
|
CURRENT OUTPUT
0–20 mA
4–20 mA
|
VOLTAGE OUTPUT
±10 VDC
0–10 VDC
|
|
Eight configurable, non-isolated analog output channels for the RX3i control platform.
|
The choice between current and voltage output should be based on the receiving device, the electrical design and the signal requirements of the application. Selecting the correct range is essential: the controller configuration and the field device must use compatible signal characteristics.
|
02
|
What Matters in System Integration?
Output selection is only one part of a successful installation. Engineers also need to consider external field power, load characteristics, controller compatibility and the terminal connection arrangement. These details influence whether the module can operate correctly within the wider control system.
|
External field power
The module requires an external 24 VDC nominal supply for field output circuits. The specified voltage range is 19.2–30 VDC.
Load requirements
Check the connected device against the output load limits. The specified minimum voltage-mode load resistance is 2 kΩ; current-mode load capacity depends on the available user supply voltage.
Controller and configuration
The module is designed for an RX3i Universal Backplane and requires an RX3i CPU with firmware version 3.0 or later. Configuration requires Machine Edition Logic Developer-PLC version 5.0 SP3 or later.
Terminal connection
Compatible terminal blocks include IC694TBB032, IC694TBB132, IC694TBS032 and IC694TBS132. Terminal blocks are ordered separately.
A practical integration review should confirm the channel range, field wiring, external supply and receiving-device load before commissioning. This helps reduce configuration mismatches and unnecessary troubleshooting during startup or replacement.
IC695ALG708 · KEY TECHNICAL VALUES
|
Number of channels
8
|
Approx. update rate
8 ms
|
|
External supply range
19.2–30 VDC
|
Maximum power dissipation
7.25 W
|
|
Field-to-backplane isolation
2550 VDC / 1 s
|
Output settling time
2 ms
|
The approximate update rate depends on the I/O scan time and application configuration.
CONCLUSION
A dependable output stage starts with the right engineering match.
The GE IC695ALG708 brings eight configurable analog output channels to the PACSystems RX3i platform, supporting both voltage and current signal ranges. Its value in a control system depends on correct range selection, compatible field devices, suitable external power and verified controller configuration.
For maintenance teams planning a replacement or engineers reviewing an existing installation, checking these interface requirements before installation is an important step toward a smooth return to operation.
ENGINEERING QUESTIONS
FAQ — GE IC695ALG708
Q1. Can the GE IC695ALG708 mix voltage and current output ranges across its eight channels?
Yes. The module provides eight configurable output channels, with current ranges of 0–20 mA and 4–20 mA, and voltage ranges of 0–10 VDC and ±10 VDC. Configure each channel according to the connected field device and verify the channel setup before commissioning.
Q2. What should be checked when replacing a GE IC695ALG708 in an operating RX3i system?
Confirm the exact catalog number, RX3i backplane and CPU compatibility, firmware level, channel-by-channel output ranges, external field supply and terminal block type. Also compare the existing wiring and load requirements with the replacement configuration before restoring operation.
Q3. Does the GE IC695ALG708 support HART communication on its 4–20 mA channels?
No. The IC695ALG708 provides analog current and voltage outputs but does not provide HART communication. If HART capability is required, evaluate the appropriate HART-capable module, such as the IC695ALG728, and confirm system compatibility before selection.
Q4. Why is an external 24 VDC supply required for the GE IC695ALG708?
The module requires external field power for its output circuits. The nominal supply is 24 VDC, with a specified operating range of 19.2–30 VDC. Check supply capacity, polarity, wiring and field-load demand as part of the installation review.
Q5. What load limits should engineers consider for GE IC695ALG708 voltage and current outputs?
For voltage output, the specified minimum load resistance is 2 kΩ. For current output, the maximum load is dependent on the user supply voltage; the specification gives 850 Ω maximum at a 20 V user supply. Check the actual loop supply and connected load together rather than relying on the current rating alone.
|
PARTS SUPPORT · AMIKON
Looking for GE IC695ALG708?
Contact our team for part number confirmation, availability and quotation assistance.
|
SEND AN INQUIRY |
AMIKON PRODUCT PORTFOLIO
Industrial Automation Parts
Automation components for control, protection, monitoring and industrial system maintenance.
|
HIMA Black Horse DCS & ProSoft Modules
ABB DCS AC800F / AC800M
ABB & KUKA Robot Spare Parts
Rockwell Automation & ICS Triplex Trusted Systems
TRICONEX / TRICON Cards
WOODWARD 9907 Series
|
GE Gas Turbine Spare Parts
DEH Control Cards & Steam Turbine Spare Parts
Yokogawa CS3000 Series
Bently Nevada 3500 Series
Emerson DeltaV / CSI 6500 / Philips / epro
|
International Delivery on the Day Quick Response Support Intercontinental Cooperation Network |
AMIKON LIMITED Industrial Automation Parts |