
| SALES MANAGER
Miya Zheng
|
| Manufacturer | Bently Nevada |
| Product family | 3300 XL NSv Proximity Transducer System |
| Probe base model | 330904 — M8 × 1 thread, with armor |
| Unthreaded length | 0 mm |
| Overall case length | 50 mm |
| Total probe length | 7.0 m |
| Cable armor | Armored |
| Connector option | Miniature coaxial ClickLoc with connector protector |
| Cable type | Standard cable |
| Approval option | 05 — Multiple approvals |
| CONTACT SUPPORT
Miya Zheng
|
The 3300 XL NSv system uses a probe, compatible extension cable and NSv Proximitor Sensor to form a calibrated measurement chain. The probe detects changes in the gap between its sensing tip and a conductive target. The complete system can support radial vibration, radial position, axial position, tachometer, zero-speed and phase-reference measurements when configured for the relevant application.
|
01
Probe
Senses target displacement. |
02
Extension Cable
Completes the specified electrical length. |
03
Proximitor
Conditions the probe signal. |
04
Monitor
Processes the measurement input. |
| Mounting Thread
Confirm the M8 × 1 threaded mounting port and ensure that the mounting surface is clean and undamaged. |
Case & Projection
This configuration has a 50 mm case and 0 mm unthreaded length. Verify the required probe projection and target clearance. |
| Armored Lead
Check the armor route, connector accessibility and bending conditions. Avoid forcing the armored lead into a tight radius. |
Approvals & System Fit
Confirm the actual approval markings and match the NSv extension cable, Proximitor and monitor channel before commissioning. |
The C70 option specifies a 7.0 m total probe length. It is important to distinguish this from the 0.5 m, 1.0 m and 5.0 m options available in the NSv ordering scheme.
It is the armored M8 × 1 version. The 330904 base model specifies an armored NSv probe. This differs from the 330903 base model, which is the M8 × 1 version without armor.
Yes. D01 specifies a miniature coaxial ClickLoc connector with connector protector and standard cable. Check the mating connector and cable condition when replacing an installed probe.
Do not assume interchangeability with the standard 3300 XL 8 mm system. This is an NSv probe and must be paired with compatible NSv extension cable and Proximitor components. Confirm the complete system family and electrical length.
Option 05 denotes multiple approvals, but the exact approval coverage must be checked against the product's marking and the applicable approval quick-reference information. Confirm that the certification matches the hazardous-area classification and installation jurisdiction.
Please contact us within 7 days of receipt if an issue arises. Returned items must remain in their original condition, with the reason for return stated. Refund or replacement processing begins after the returned goods have been received and checked. Return shipping costs are the buyer’s responsibility.
| 3RU2116-1GB0 | WZ-1000-2 | 7402-040-01 | XS824-25 | MFM384-RC |
| 6ES7323-1BL00-0AA0 | IDR820 | ZB12-1.6 | NTN7153B | GT1155-QSBD |
| 140CRP93100 | LC5200 | MMCM-C50/3 | 3RP2525-1BW30 | 70-491-11 |
| CP-S 24/10.0 | KJ4001X1-CC1 | FAS-113DG | DPSN400A | 3RT2016-1AB01 |
| B8512C4A50-HW11 | AJ65BTB2-16D | 6ES5375-0LC41 | 1SVR427015R0100 | XPDi8 |
| PKZM0-25 | CONVONOFF0 | 704015/0-154-22 | 1SBL141001R8110 | RM17UAS15315M |
| S2N-55 | GHQ6310062R0111 | PM18T-2ND | M300-VAD | WAGO 750-323 |
| 060-110166 | DDNP1501 | ZB12-10 | OSC15-IAW | 56C315RP |
| Coumi2000 | TPS-6L-FPW-T | XCK-J | MS 400B | 9121050000 |
| 1SVR427015R0100 | MMK-6L 6501114 | NX-1508E | KFD2-CRG2-1.D | PW482-10 |
| SALES MANAGER
Miya Zheng
|



Inventory Products


More than 40.000.000 products available and worldwide support