
| SALES MANAGER
Miya Zheng
|
| Manufacturer | Bently Nevada |
| Series | 7200 Proximity Transducer System |
| Probe type | 8 mm Standard Mount |
| Case thread | 3/8-24 |
| Unthreaded case length | 3.2 in |
| Overall case length | 5.6 in |
| Integral cable length | 1.0 m |
| Cable armor | Without armor |
| Connector | Miniature male coaxial connector |
| TALK TO OUR TEAM
Miya Zheng
|
The probe operates on the eddy-current principle. When positioned near a conductive target, changes in the gap affect the electrical response of the transducer system. The resulting signal can be used by compatible monitoring equipment to evaluate shaft vibration or position.
|
01
Probe
Detects changes in the distance between the probe tip and conductive target. |
02
Extension Cable
Provides the required electrical connection and system length when specified. |
03
Proximitor
Works with the probe and cable as a calibrated transducer combination. |
| Thread & Mounting Port
Confirm the 3/8-24 mounting thread and inspect the port for damage, contamination or thread mismatch before installation. |
Probe Projection
Compare the 3.2 in unthreaded length and 5.6 in overall case length with the actual mounting depth and target position. |
| Cable Routing
The integral lead is unarmored. Plan routing to avoid abrasion, sharp edges, excessive bending and moving machinery. |
Electrical Matching
Retain the correct 7200 probe, extension cable and Proximitor combination. Verify the complete system length and calibration before commissioning. |
It uses a 3/8-24 thread. Confirm the existing machine port before ordering; an M10 × 1 probe is not a direct mechanical substitute simply because the nominal dimensions appear close.
Check the mounting thread, 3.2 in unthreaded case length, 5.6 in overall case length, target clearance and cable routing. Also compare the connector and installed system configuration with the existing part.
Do not assume direct compatibility. This part belongs to the 7200 Series. The probe, extension cable and Proximitor must form the correct calibrated 7200 measuring chain. A similar connector does not prove electrical interchangeability.
No. The 1.0 m value describes the probe's integral lead. The complete transducer electrical length also depends on the associated extension cable and Proximitor configuration. Verify the calibrated combination rather than adding cable lengths without checking the system requirements.
The most common risks are a mismatched thread, incorrect probe projection, damaged unarmored lead and an incompatible electrical chain. Confirm mounting geometry and the matching 7200 components before returning the machine to service.
Please contact us within 7 days of receipt if an issue arises. Returned items must remain in their original condition, with the reason for return stated. Refund or replacement processing begins after the returned goods have been received and checked. Return shipping costs are the buyer’s responsibility.
| FAS-113DG | 140CRP93100 | MMK-6L 6501114 | 3RU2116-1GB0 | KFD2-CRG2-1.D |
| CP-S 24/10.0 | XPDi8 | WAGO 750-323 | 060-110166 | GT1155-QSBD |
| PW482-10 | ZB12-10 | 1SVR427015R0100 | LC5200 | 9121050000 |
| 3RP2525-1BW30 | B8512C4A50-HW11 | AJ65BTB2-16D | MMCM-C50/3 | MFM384-RC |
| NTN7153B | 3RT2016-1AB01 | 6ES5375-0LC41 | DDNP1501 | XS824-25 |
| 70-491-11 | PKZM0-25 | S2N-55 | 7402-040-01 | XCK-J |
| 704015/0-154-22 | PM18T-2ND | DPSN400A | 1SBL141001R8110 | CONVONOFF0 |
| M300-VAD | ZB12-1.6 | OSC15-IAW | IDR820 | 6ES7323-1BL00-0AA0 |
| WZ-1000-2 | RM17UAS15315M | 56C315RP | GHQ6310062R0111 | TPS-6L-FPW-T |
| Coumi2000 | NX-1508E | 7402-040-01 | MS 400B | 1SVR427015R0100 |
| SALES MANAGER
Miya Zheng
|



Inventory Products


More than 40.000.000 products available and worldwide support