
| SALES MANAGER
Miya Zheng
|
| Manufacturer | Bently Nevada |
| Product family | 3300 XL NSv Proximity Transducer System |
| Probe base model | 330903 — M8 × 1 thread, without armor |
| Unthreaded length | 170 mm |
| Overall case length | 190 mm |
| Total probe length | 0.5 m |
| Cable armor | Without armor |
| Connector option | Miniature coaxial ClickLoc connector, without connector protector |
| Cable type | Standard cable |
| Approval option | 00 — Not required |
| CONTACT SUPPORT
Miya Zheng
|
The 330903-17-19-05-02-00 uses an M8 × 1 threaded case and a 170 mm unthreaded section. The case length is 190 mm. These dimensions affect the installed probe position and should be checked against the machine mounting boss, available insertion depth and target geometry.
|
170
Unthreaded Length / mm
A key dimension for assessing the probe's mounting projection and the required clearance. |
190
Case Length / mm
Check the complete case dimension against the mounting arrangement and surrounding structures. |
0.5
Total Length / m
Include the probe's specified total length when planning the cable connection to the NSv system. |
| Mounting Interface
Confirm the M8 × 1 thread, mounting-port condition and the available insertion depth. Avoid cross-threading during installation. |
Target Clearance
Verify that the probe tip reaches the required position and that the target surface is within the intended sensing geometry. |
| Unarmored Cable
Route the standard cable away from abrasion points, sharp edges, hot surfaces and moving equipment. |
NSv System Matching
Verify the NSv extension cable, Proximitor Sensor, monitor input and total electrical length as a complete measurement chain. |
The A17 option specifies a 170 mm unthreaded length, while B19 specifies a 190 mm overall case length. Both dimensions affect the mounting geometry and should be checked against the installed probe position.
No. The 330903 base model is the M8 × 1 NSv probe without armor. If the installed cable requires mechanical protection, review the routing conditions and the correct armored alternative rather than assuming the unarmored version is equivalent.
No. The D02 option specifies a miniature coaxial ClickLoc connector without a connector protector and with standard cable. Confirm that the mating connector and environmental protection requirements match the installation.
Not without a mounting review. Although both may use an M8 × 1 thread, the 170 mm unthreaded length and 190 mm case length can produce a different installed projection. Check the available insertion depth, target clearance and required sensing position.
Use compatible 3300 XL NSv extension cable and NSv Proximitor components. Confirm the total electrical length, monitor channel configuration, probe gap and target material before commissioning. The probe should not be evaluated separately from the calibrated system.
Please contact us within 7 days of receipt if an issue arises. Returned items must remain in their original condition, with the reason for return stated. Refund or replacement processing begins after the returned goods have been received and checked. Return shipping costs are the buyer’s responsibility.
| 704015/0-154-22 | 1SBL141001R8110 | PM18T-2ND | 140CRP93100 | WAGO 750-323 |
| M300-VAD | 3RU2116-1GB0 | XPDi8 | MMCM-C50/3 | KJ4001X1-CC1 |
| 6ES5375-0LC41 | GHQ6310062R0111 | ZB12-10 | DPSN400A | 3RP2525-1BW30 |
| FAS-113DG | LC5200 | 1SVR427015R0100 | XS824-25 | NTN7153B |
| MMK-6L 6501114 | IDR820 | 6ES7323-1BL00-0AA0 | AJ65BTB2-16D | CP-S 24/10.0 |
| 3RT2016-1AB01 | ZB12-1.6 | WZ-1000-2 | GT1155-QSBD | S2N-55 |
| 7402-040-01 | DDNP1501 | 1SVR427015R0100 | B8512C4A50-HW11 | OSC15-IAW |
| 060-110166 | MFM384-RC | PKZM0-25 | 56C315RP | RM17UAS15315M |
| Coumi2000 | CONVONOFF0 | NX-1508E | XCK-J | TPS-6L-FPW-T |
| 70-491-11 | 9121050000 | MS 400B | PW482-10 | KFD2-CRG2-1.D |
| SALES MANAGER
Miya Zheng
|



Inventory Products


More than 40.000.000 products available and worldwide support