ET5*C accepts a thermocouple input, applies reference-junction compensation and configured scaling, then provides two isolated-use 1–5 V DC output paths for connected instrumentation.
Suffix /BU: upscale burnout · /BD: downscale burnout · /DF: Fahrenheit display.
| Accepted sensors | K, T, J, E, B, R, S, N thermocouples |
| Analog output | 1–5 V DC × 2 |
| Load / output resistance | ≥ 2 kΩ / ≤ 1 Ω |
| External input resistance | ≤ 500 Ω |
| Dimensions / mass | 73 × 24 × 115 mm / approx. 70 g |
| Connection | Dedicated nest connector · M4 field terminals |
Condition temperature signals from vessels, piping and thermal equipment.
Feed stable temperature values into monitoring and control instruments.
Maintain installed signal-conditioning assemblies and spare strategies.
K, T, J, E, B, R, S and N input types are listed in the official specification.
Correct reference-junction compensation depends on the specified connector arrangement.
Configuration supports Celsius, Fahrenheit or Kelvin; /DF identifies Fahrenheit display.
Burnout behavior can drive the signal upscale or downscale according to configuration.
Confirm the complete suffix, thermocouple type, required range, display unit and burnout direction.
AMIKON supplies industrial automation parts to system integrators, OEM and MRO teams worldwide. Our inventory and sourcing network help customers respond to shortages, extended lead times and obsolete equipment.
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported