HONEYWELL / ADDRESSABLE FIRE ALARM
|
CONTROL SERIES · RELAY MODULE
TC810R1024
Intelligent Addressable Relay Module
A relay interface for auxiliary control in compatible fire alarm systems. Two Form-C dry contacts switch together to operate external equipment through a programmed or manual control action.
|
RELAY OUTPUT
02
FORM-C CONTACTS
Coordinated Switching Action
|
|
15–32
VDC OPERATING VOLTAGE
|
6.5 mA
MAX. CURRENT DRAW
|
159 / 99
FLASHSCAN / CLIP ADDRESSES
|
01 — HOW IT WORKS
A control command becomes a relay action.
TC810R1024 provides a dry-contact interface between the fire alarm control system and auxiliary equipment. The relay can be activated manually or through panel programming on a selected basis.
|
STAGE 01
Panel
Control command
|
› |
STAGE 02
TC810R1024
Relay switching
|
› |
STAGE 03
Equipment
Auxiliary response
|
Important: the two Form-C dry contacts switch together. They should not be interpreted as two independently addressable relay channels.
02 — LOOP ADDRESSING
Protocol determines the address range.
|
FLASHSCAN
159
Possible module addresses
01–159
|
CLIP
99
Possible module addresses
01–99
|
Address selection is made using rotary switches. Confirm the loop protocol and the intended address before installing or replacing the module.
03 — TECHNICAL PROFILE
Operating Data
| Specification |
Value |
| Normal operating voltage |
15–32 VDC |
| Maximum current draw |
6.5 mA, LED on |
| Average current, direct poll |
230 μA |
| Average current, group poll |
255 μA |
| Operating temperature |
0°C to 49°C |
| Relative humidity |
10%–93%, non-condensing |
| Dimensions |
114.3 × 101.6 × 31.75 mm |
| Mounting box |
4-inch square × 2.125-inch deep box |
| EOL resistance |
Not used |
04 — CONTACT CAPACITY
Load type changes the rating.
Select the contact rating that corresponds to the actual voltage, load type and switching duty. Resistive and inductive ratings are not interchangeable.
| Load condition |
Rating |
| 30 VDC · Resistive · Non-coded |
3.0 A |
| 30 VDC · Resistive · Coded |
2.0 A |
| 110 VDC · Resistive · Non-coded |
0.9 A |
| 125 VDC · Resistive · Non-coded |
0.9 A |
| 30 VDC · Inductive · Coded · L/R=5 ms |
0.5 A |
| 30 VDC · Inductive · Coded · L/R=2 ms |
1.0 A |
| 125 VAC · Inductive · Non-coded · PF=0.35 |
0.3 A |
| 25 VAC · Inductive · Non-coded · PF=0.35 |
1.5 A |
| 70.7 VAC · Inductive · Non-coded · PF=0.35 |
0.7 A |
| 25 VAC · Inductive · Non-coded · PF=0.35 |
2.0 A |
05 — CONTROL APPLICATIONS
Relay switching in building systems
|
01
Fan & Damper Control
Relay control for ventilation equipment and damper circuits.
|
02
AHU Shutdown
Auxiliary air-handling equipment shutdown through a configured control sequence.
|
|
03
Door Holder Release
Relay switching for door-holder control circuits.
|
04
Detector Power Reset
Reset control for four-wire smoke detector power circuits.
|
A green LED blinks when communication is received from the control panel.
REQUEST PRODUCT DETAILS
Looking for TC810R1024?
Send us the full model number and required quantity. For replacement enquiries, include your panel type, loop protocol and existing module address.
06 — SELECTION QUESTIONS
TC810R1024 — Practical FAQ
01. Can the two TC810R1024 Form-C contacts operate independently?
No. Both Form-C dry contacts switch together. The module does not provide two separately addressable relay outputs.
02. How should the TC810R1024 address be selected for FlashScan or CLIP?
Use 01–159 for FlashScan or 01–99 for CLIP. Confirm the control panel loop protocol before setting the rotary address switches.
03. Can TC810R1024 use the same current rating for resistive and inductive loads?
No. The listed ratings vary by load type, voltage, coded or non-coded duty and the specified electrical conditions. Select the rating that matches the connected load.
04. What should be checked before replacing an installed TC810R1024?
Check the panel model, loop protocol, module address, wiring, connected load and mounting box dimensions. Confirm the load is within the applicable contact rating.
05. What does the blinking green LED on TC810R1024 indicate?
The green LED blinks when the module receives communication from the control panel. Check the panel status and complete the relevant system tests when troubleshooting.
AMIKON / GLOBAL PARTS SUPPORT
Your Industrial Parts Supply Partner
Fast Delivery. Dependable Support. Long-Term Cooperation.
|
Warranty: 12 months worldwide! Reduce your support cost.
|
Amikon Limited has been in the industry for many years and enjoys a good reputation
|
100% Brand New! Factory Sealed! Reply to you promptly within 24 hours We can accept T/T
|
International Delivery on the Day · Quick Response Support · Intercontinental Cooperation Network
Return & Replacement Policy
Please contact us within 7 days after receiving the item if a return or replacement is required. The product should remain in its original condition, and the reason for return must be provided. A refund or replacement will be arranged after the returned item is received and assessed. Return shipping costs are the buyer's responsibility.
MODEL DIRECTORY / RELATED ITEMS
Explore More Popular Models
Browse additional industrial automation parts and send us your required model for a quotation.
| NFDV561-P00 |
6ES7531-7PF00-0AB0 |
CM82-EZ-II-BK |
SC310A-100-ASSY |
V5421B1058 |
| SPW481-53 SPW481 |
QLXD4-H51 |
BT250 YBA250 |
1756-IB16IF |
5410/EU |
| XFT100r2 42T90031 |
ANB10D-415 |
SCOPE 32XD |
150-F60NBD |
NFAI143-H01 |
| 430529 566-369 |
Tecnint hte ETN 40 |
VPS-100US |
IC200UDR010-BG |
SKDDI0764 |
| D20K 508-0101-11D |
82408217-001 |
Tsr-44 |
NANO-8522E-1GZ-R13 |
XL1000C100 |
| MB-FB-4R |
1N/O 2N/C 774028 |
SNT401-53 |
CC-12000-SENSOR-HEAD |
NFBU200-S01 |
| CVM1-CPU11-EV2 |
SK250-UHF |
SDW-532-2SM-SC15 |
03031-1045-0022 |
H16x10A-R11 |
| DCT1022 DCP100A |
ANT502-50 |
-Myra-300-P 3P/4W |
467NHP81100 |
FSH-Z2 |
| NDI-5503-AL |
SPW482-13 |
V1400R16 |
YA032HR 7940021586 |
DET4TCR/DET4TCR |
| CM82-EZ-II-WH |
6FS3083-3AG00 32C-TK |
03031-1045-0022 |
G4514-60610 |
DCT1022 DCP100A |
Need Help With Your Order?
For availability, order details and delivery enquiries, contact AMIKON.
AMIKON LIMITED · Industrial Automation Parts Supply