
| HONEYWELL / CONTROL SYSTEMS | OverviewSpecificationsIntegrationRelated ModelsFAQ |
An industrial cabinet ventilation assembly that provides forced-air cooling and an alarm contact for abnormal fan or airflow conditions. It supports thermal management inside Honeywell control-system enclosures.
| OPERATING PROFILE | |
|---|---|
| Product identity | 51303940-200 |
| Product category | Cabinet fan assembly with alarm |
| System role | Forced-air cabinet cooling |
| Rated voltage | 85-132 V AC |
| Rated frequency | 47-63 Hz |
| Rated current | 0.5 A |
| Alarm contact current | 0.5 A |
| Switching voltage | Up to 200 V DC peak |
| Monitoring function | Fan or airflow abnormal-condition alarm |
| Installation environment | Industrial control cabinet |
| Cooling principle | Forced-air ventilation |
| Protected equipment | Controllers, power units and cabinet electronics |
| Maintenance value | Early warning of cooling degradation |
| Assembly weight | Approximately 3.22 kg |
| Typical use | Honeywell DCS and process-control cabinets |
| CABINET AIR INLET Ambient air enters through the enclosure ventilation path. |
FAN ASSEMBLY Forced airflow removes heat from installed control electronics. |
ALARM CONTACT Abnormal fan or airflow status is transferred to the cabinet alarm circuit. |
MAINTENANCE RESPONSE Operators can investigate cooling loss before internal temperature rises further. |
| Q1 | Which electrical values must be confirmed before ordering? Check the rated voltage, frequency, current and alarm-contact circuit against the installed cabinet wiring. |
| Q2 | Does the assembly include alarm monitoring? Yes. It includes an alarm-contact function intended to indicate abnormal fan or airflow conditions. |
| Q3 | Can a visually similar fan be used as a substitute? Not without checking mounting, airflow direction, electrical rating, connector arrangement and alarm-contact behavior. |
| Q4 | What should be inspected when the unit arrives? Check the part number, fan blades, guard, wiring, connector, alarm-contact leads and transit condition. |
| Q5 | What should be tested after installation? Confirm airflow direction, unobstructed ventilation, normal current and correct alarm action during a controlled fan-fault test. |
| REF615E_D REF615E-D | 71503-052130 | D200175 AP31 |
| VPM-8100Q-000 | FC-CPCHAS-0001 | 1797-IE8NF |
| CS-SS-RHR1HE-03 | 79835-66515 | MA40-7073 |
| 11-018-164 | 2080-DNET20 | SPW481-13 |
| DSQC239 YB560103-CH | 1747-KFC15 | WMZT3D20T |
| RAIO-01 64379224F | A413141 BIU82 | K9634DA K9634DA-01 |
| 140DAO85300 | SDV144-S33 S2 | AAT145-S50 S1 |
| 51305391-300 | FC-TSAO-0220M | 51196990-500 |
| SAI143-H63 S4 | 194r-c30-1753 | 51308097-200 |
| 51196742-200 | FTA-T-20 | E24KN9ZCCM |
| NFDV551-P11 | 22TA-L4-SS | SNT521-53 |
| VPM-8100LS-000 | DSQC323 3HAB5956-1 | FIO-11 68679079 |
| C98043-A7600-L1 | ASS9981DE-02 | ALR121-S51 S1 |
| FC-BKM-0001 V1.1 | 4L-E4-C1A-TT | 07KR91 GJR5250000R0151 |
| 02-681-339 | FC-IO-0001 V1.1 | 4L-L4-M2-B1A |
| 1KHW001356R0001 P4RX | 81003-438-51-R | NA50-40NAMKNN-CE |
| EPDM 76/DN80/3 | MSD013A1Y | 2711P-K6C20A |
| 103147 SAE-14 | RDIO-01 64379216D | 05V-0070L |
| FS-USI-0001 | MSD5AZA1Y | DSQC256A 3HAB2211-1 |
| 51305896-100 | TM80125 | 1785-L60B/C |
Send the complete part number, quantity, destination and target delivery date for a focused quotation.
CONTACT SALES


Inventory Products


More than 40.000.000 products available and worldwide support