
|
PROBE HOUSING ASSEMBLY
21000-28-10-20-102-01-02
Proximity Probe Housing Assembly
Aluminum housing with a 3300 XL 8 mm probe, 1.0 m cable, 2.0 in standoff and 10.2 in probe penetration.
|
21000
HOUSING ASSEMBLY
|
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| Housing family | 21000 proximity probe housing |
| Probe option 28 | 3300 XL 8 mm, selectable approvals |
| Probe cable option 10 | 1.0 m |
| Standoff option 20 | 2.0 in |
| Probe penetration 102 | 10.2 in |
| Fitting option 01 | One 3/4-14 NPT fitting and one plug |
| Mounting thread 02 | 3/4-14 NPT |
| Body material | Aluminum |
| Sleeve material | 304 stainless steel |
| Typical weight | 1.1 kg without fittings |
| Penetration adjustment | 13 mm, +/-0.5 in |
|
System integration
Install through the machine case with the specified 3/4-14 NPT mounting thread. Confirm target distance, sleeve support, cable routing, probe gap and matched electronics.
|
Selection value
The 10.2 in penetration and 2.0 in standoff control the mechanical reach. Confirm both dimensions against the machine cross-section before ordering.
|
Application focus
Permanent probe installation through turbine, compressor, pump or other rotating-machine housings where adjustment and probe protection are required.
|
|
21000 housing
ALUMINUM BODY / STAINLESS SLEEVE
Advantage: practical weight and broad dimensional configurability for permanent external probe adjustment.
Use when: the installation is compatible with aluminum and the priority is an adjustable, maintainable probe housing. The featured 21000-28-10-20-102-01-02 belongs here.
|
24701 housing
STAINLESS-STEEL HOUSING OPTION
Advantage: stronger corrosion resistance where the surrounding atmosphere is unsuitable for an aluminum body.
Use when: environmental exposure or plant material practice calls for a stainless housing. Confirm dimensions, fittings and probe arrangement independently.
|
Direct probe mounting
NO EXTERNAL ADJUSTABLE HOUSING
Advantage: fewer external housing parts and a compact installation where the machine design already protects and positions the probe.
Use when: the probe can be safely mounted, gapped and serviced without an adjustable external housing.
|
| Featured configuration | 3300 XL 8 mm probe; 1.0 m cable; 2.0 in standoff; 10.2 in penetration; explosion-proof fitting and plug; 3/4-14 NPT mounting thread. |
| Long-reach decision | Because standoff plus penetration exceeds 12 in, evaluate sleeve support so vibration and side loading do not compromise probe stability. |
|
GLOBAL TEAM
|
20 Years of Industrial Automation Supply
AMIKON supports maintenance teams with careful part-number matching, international delivery, responsive quotation and a 12-month warranty.
|
WAREHOUSE / DELIVERY
|
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| 01 | Does 21000-28-10-20-102-01-02 include the probe? | Yes. Code 28 selects a 3300 XL 8 mm probe with selectable hazardous-area approvals and code 10 selects 1.0 m cable. |
| 02 | What do 20 and 102 control? | Code 20 specifies a 2.0 in standoff; 102 specifies 10.2 in probe penetration. Both must match machine geometry. |
| 03 | Is this standard 21000 housing CSA explosion-proof? | Do not assume so. CSA explosion-proof housing certification applies to CA versions under the specified fitting conditions. |
| 04 | Is additional sleeve support required? | The combined standoff and penetration exceed 12 in, so support near the probe should be evaluated to prevent sleeve resonance. |
| 05 | What should accompany a quotation? | Provide mounting-surface-to-target distance, housing thread, probe system, fittings, approvals, cable routing and quantity. |
|
Confirm the exact configuration before purchase
Send the complete part number, mating hardware, application and quantity.
|
REQUEST A QUOTE |
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |



Inventory Products


More than 40.000.000 products available and worldwide support