
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| Minimum operating speed | 90 rpm |
| Typical machine speed | 100 to 300 rpm |
| Sensitivity | 4 mV/(mm/s) peak |
| English sensitivity | 100 mV/(in/s) peak |
| Power supply | 9 to 24 VDC, 5 mA maximum |
| Mounting option 02 | 3/8-24 to 1/2-20 stud |
| Connection option 00 | MIL-C-5015 interface |
| Operating temperature | -40 to +85 deg C |
| Housing | 316L stainless steel |
| Height | 82 mm |
| Typical weight | Below 297 g |
|
System integration
Mount firmly on the bearing housing or machine casing. Poor mounting can attenuate amplitude, alter frequency response or create signals unrelated to actual machine vibration.
|
Selection value
Choose Velomitor CT where standard velocity sensors lack low-frequency response. Confirm stud, connector, approval marking, monitor input and cable.
|
Application focus
Cooling-tower fans, air-cooled heat exchangers, fan motors, reducers and other slow-speed casing-vibration duties.
|
|
MOUNTING DECISION
190501 stud options compared
The sensing performance remains within the Velomitor CT family. Select the stud code by the threaded hole in the machine and the mechanical interface required at the transducer.
|
|
|
GLOBAL TEAM
|
20 Years of Industrial Automation Supply
AMIKON supports maintenance teams with careful part-number matching, international delivery, responsive quotation and a 12-month warranty.
|
WAREHOUSE / DELIVERY
|
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| 01 | Is 190501-02-00-05 suitable below 90 rpm? | Its intended operating floor is 90 rpm. For slower machines, confirm expected vibration frequency and monitor capability before purchase. |
| 02 | What does mounting code 02 provide? | It specifies a 3/8-24 to 1/2-20 stud for the transducer mounting interface. |
| 03 | What cable interface is required? | Connection code 00 uses the MIL-C-5015 interface. Confirm mating cable, pin polarity and required cable length. |
| 04 | Where should the transducer be mounted? | Use a rigid bearing-housing or machine-casing location that transmits rotor vibration; avoid thin or flexible surfaces. |
| 05 | What should accompany a quotation? | Provide machine speed, mounting thread, cable length, monitor type, hazardous-area requirement, quantity and destination. |
|
Confirm the exact configuration before purchase
Send the complete part number, mating hardware, application and quantity.
|
REQUEST A QUOTE |
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |



Inventory Products


More than 40.000.000 products available and worldwide support