Bently Nevada 146056-38-10-02-02-05 3300 XL Ceramic Capped Proximity Probe
A ceramic-capped proximity probe designed for demanding machinery monitoring environments where protection against corrosive gases, liquids and elevated pressure is important.
The ceramic-capped design uses an alumina ceramic cap and a 304 stainless steel probe case to provide robust protection in aggressive chemical or high-pressure environments.
The 146056 configuration adds rear protection through stainless steel tubing and a rear fitting, helping prevent corrosive gases and liquids from entering the probe case from both ends.
Bently Nevada proximity sensing technology is used for machinery condition monitoring, including measurement of rotor shaft position and vibration within fluid-film bearing clearances.
This type of sensing is valuable on critical rotating equipment where changes in shaft behavior can indicate developing mechanical conditions and create a need for timely maintenance action.
Unstable, missing or abnormal proximity measurements can prompt inspection of the probe system.
Corrosive gases, liquids or demanding pressure conditions increase the importance of suitable probe construction.
Loss of dependable machine measurements can reduce protection visibility and delay maintenance decisions on critical equipment.
Millions of industrial parts • Fast delivery • Attentive customer service • Supply support for your automation requirements
Our sales office responds actively to spare-part inquiries and works with customers on replacement solutions and delivery planning. We support a broad range of electrical and industrial automation components and can discuss stocking options beyond standard product ranges when required.
Send the following details so we can respond efficiently to your automation spare-part requirement.
Please contact us within 7 days if you have any question after receiving the items.
Returned items should remain in their original condition. Please provide the specific reason for the return. A return or replacement will be arranged after the returned items are received.
The buyer is responsible for all shipping costs incurred.
The 3500/22M 138607-01 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
The 3500/33 16-Channel Relay Module is a full-height module that provides 16 relay outputs. You can place any number of 16-channel relay modules in any of the slots to the right of the Transient Data Interface (TDI) Module. Each output of the 3500/33 16-Channel Relay Module can be independently programmed to perform voting logic.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The 3500/60 133811-01 modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/72M Recip Rod Position Monitor meets API 618 requirements for reciprocating compressors. It measures: l Rod position l Rod drop l Hyper-compressor The four-channel 3500/72M Recip Rod Position Monitor accepts input from proximity transducers, conditions the signal to provide dynamic and static position measurements, and compares the conditioned signals with userprogrammable alarms. Each channel, depending on how you configure it, typically conditions its input signal to generate various parameters called measured values.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported