A replacement display deserves a closer compatibility check.
The Allen-Bradley 2711P-RDK10C is a PanelView Plus display keypad component with a 10.4-inch color TFT screen. It combines keypad operation with an analog resistive touch interface and is intended for use with the appropriate PanelView Plus logic module and system configuration.
10.4"
Screen size
640×480
Resolution
300
cd/m² luminance
IP65
Front protection
02 / HARDWARE DETAILS
Built around operator interaction.
The display keypad provides a combination of touch input and physical keys for operating compatible PanelView Plus applications.
Important selection note
Confirm the display series and logic-module platform before selecting a replacement.
Specification
Details
Display type
Color TFT
Display size
10.4 inches
Resolution
640 × 480 pixels
Luminance
300 cd/m²
Input
Keypad and analog resistive touch
Backlight
CCFL on Series B and earlier; LED on Series C
Front protection
IP65
Panel cutout
224 × 375 mm
Dimensions
399 × 248 × 55 mm
03 / REPLACEMENT CONSIDERATIONS
Do not treat every 10-inch display as interchangeable.
Series identification
Check the series marking on the existing display. Series C uses LED backlighting, while Series B and earlier use CCFL backlighting.
Firmware considerations
A CCFL-to-LED display change may require a terminal firmware upgrade. Requirements differ by platform family.
Discontinued product notice
Rockwell Automation lists 2711P-RDK10C as discontinued as of September 30, 2022. Confirm availability and replacement suitability before planning a maintenance change.
04 / CHECK BEFORE ORDERING
Four details worth sending with your inquiry
01 Full display part number and series
02 Logic-module catalog number
03 Terminal firmware revision
04 Existing display label photo
05 / CONTACT AMIKON
Need a 2711P-RDK10C replacement?
Send your original unit details and application information. Our team can help review the part number and your purchasing requirements.
Q1. Is Allen-Bradley 2711P-RDK10C a complete PanelView Plus terminal?
It is a display keypad component, not a complete terminal by itself. Confirm the matching logic module and the full terminal configuration before ordering.
Q2. Can Allen-Bradley 2711P-RDK10C replace a Series B display directly?
Do not assume direct interchangeability. Series identification, backlight type, platform family and firmware requirements must be checked before a display change.
Q3. Does Allen-Bradley 2711P-RDK10C require a firmware upgrade when changing from CCFL to LED?
A CCFL-to-LED display replacement can require a terminal firmware upgrade. The correct firmware depends on the PanelView Plus platform family, so verify the existing terminal configuration first.
Q4. What information is needed to confirm Allen-Bradley 2711P-RDK10C compatibility?
Provide the display series, logic-module catalog number, firmware revision and photos of the original labels. These details help determine whether the proposed display is suitable.
Q5. What should buyers consider when sourcing discontinued Allen-Bradley 2711P-RDK10C?
Check the exact catalog number, series, physical condition and seller's warranty terms. Also review the replacement plan for the complete terminal rather than selecting by screen size alone.