| STRATIX 8000 / 1783-MS10T | Overview Specifications Integration Related Models FAQ |
|
MANAGED
10
ETHERNET PORTS
|
INDUSTRIAL NETWORK INFRASTRUCTURE
1783-MS10TStratix 8000 Layer 2 Managed Switch
A ten-port managed industrial Ethernet switch for machine and plant networks. It combines Layer 2 switching, managed network functions, alarm signaling and an industrial DC power range in the Stratix 8000 platform. REQUEST PRICE & AVAILABILITYSales manager: Miya zheng | sales@amikon.cn | WhatsApp: 86-18020776792
|
| 01 | Product family | Stratix 8000 |
| 02 | Switch type | Managed industrial Ethernet switch |
| 03 | Switching function | Layer 2 |
| 04 | Routing function | Not provided |
| 05 | Total ports | 10 |
| 06 | Power input | 18...60 VDC, Class 2 / SELV, 2 A maximum |
| 07 | Maximum inrush current | 2 A |
| 08 | Maximum power consumption | 15.7 W, excluding expansion-module power |
| 09 | Alarm relay | 1 A maximum at 30 VDC, Class 2 / SELV |
| 10 | Ethernet connection | RJ45 with suitable industrial category 5e cabling |
| 11 | Operating temperature | -40...60 deg C |
| 12 | Nonoperating temperature | -40...85 deg C |
| 13 | Relative humidity | 5...95%, noncondensing |
| 14 | Dimensions | 153 mm W x 148 mm H x 117.5 mm D |
| Base-port arrangement 2 Gigabit Ethernet ports and 8 Fast Ethernet ports |
Protection and construction IP20, open-style equipment for a suitable enclosure |
Continuous isolation 75 V basic insulation between power, ground, network channels and alarm |
| Port isolation boundary No isolation between individual Ethernet ports; console and system are not isolated |
Power and alarm conductor 0.5 mm2 copper conductor, rated 90 deg C or higher |
Ground conductor 3.3 mm2 copper conductor, rated 75 deg C or higher |
| Terminal torque 0.23 N m for power and alarm terminals |
Operating vibration 2 g at 10...500 Hz |
Shock capability 20 g operating; 30 g nonoperating |
| VLAN segmentation Separates machine cells, devices or traffic classes within the Layer 2 design. |
Quality of Service Prioritizes important industrial communication classes when correctly configured. |
IGMP snooping Controls multicast forwarding and helps prevent unnecessary traffic at unrelated ports. |
| Loop protection Spanning-tree functions and guard features support a controlled redundant topology. |
CIP integration Allows supported controller and engineering tools to view switch identity and diagnostic status. |
Alarm and event handling Alarm relay, event logging and network notifications support maintenance response. |
Available functions and configuration behavior depend on the installed firmware and selected feature set. Preserve the existing configuration before hardware replacement.
| CONTROLLERS Control traffic |
1783-MS10T VLAN, port and traffic management |
HMIs / DRIVES / I/O Industrial endpoints |
| Engineering boundary: define addressing, VLANs, port roles, redundancy, multicast handling, security settings, management access and device priorities before commissioning. |
| 01 / Inspect Verify catalog number, firmware label, power terminals, alarm wiring and expansion hardware. |
> | 02 / Restore Load or rebuild the approved IP, VLAN, port, QoS and security configuration. |
> | 03 / Validate Confirm links, alarms, multicast behavior, controller access and redundant-path recovery. |
| Power check Confirm voltage under load, grounding and alarm-contact wiring. |
Link check Confirm negotiated speed, duplex, errors and expected port state. |
Traffic check Confirm VLAN membership, multicast containment and critical-device reachability. |
| Q1 | Is 1783-MS10T a routing switch? No. It is a managed Layer 2 switch. Choose a suitable Layer 3 model when routing between network segments is required. |
|
| Q2 | How many ports are available? The base unit provides ten ports. Media type, expansion hardware and the required topology must be checked together. |
|
| Q3 | What supply is required? Use a properly sized 18...60 VDC Class 2 or SELV supply with the required protection, grounding and conductor sizing. |
|
| Q4 | Can 1783-RMS10T be used as a direct replacement? Not without review. The RMS model adds Layer 3 capability and can involve different configuration, firmware and network behavior. |
|
| Q5 | What should be planned before commissioning? Define IP addressing, VLANs, port roles, redundancy, security, multicast control, management access and device priorities. |
|
| Q6 | What can cause unstable communication? Network loops, cable defects, duplicate addresses, multicast loading, mismatched port settings, power disturbance and configuration errors are common causes. |
|
| Q7 | Why should firmware be checked? Feature availability, security behavior, expansion support and saved-configuration compatibility can depend on firmware revision. |
|
| Q8 | What should be preserved before replacement? Capture the running configuration, VLAN and port settings, IP plan, firmware revision, installed expansion hardware and physical topology. |
| 2711P-K6C20A | 1785-BEM | VPM-8100LS-000 |
| 05V-0070L | 1756-ENET | E24KN9ZCCM |
| 1771-SN | NCR-DABOA2D-401B | FIO-11 68679079 |
| TM80125 | 1797-IE8NF | CS-SS-RHR1HE-03 |
| A413141 BIU82 | VPM-8120X-5061-P | 2711-K6C8 |
| MDH-L425-D | 1785-L60B/C | WR-D4001 |
| EPDM 76/DN80/3 | 103147 SAE-14 | 2080-DNET20 |
| VPM-8100Q-000 | 1746-NI8 | D200175 AP31 |
| 2711P-B6M20D | 02-681-339 | NPA-20NN-50-E8 |
| MSD013A1Y | 4L-E4-C1A-TT | CC-TDOR01 51308376-175 |
| 81003-438-51-R | E2170/1/80 | 1771-IL |
| 71503-052130 | VPM-8100X-001-P | 0-57412-E |
| 2711-K6C1 | C98043-A7600-L1 | 140DAO85300 |
| DCVR-3 SC-68224 | 22TA-L4-SS | 457D943G21 |
| 2711P-K4M20D | FTD76-10-D | WMZT3D20T |
| 1734-OE2CK | 1769-L33ER | F4000-10N-W-M |
| 194r-c30-1753 | 1747-KFC15 | NA50-40NAMKNN-CE |
| 79835-66515 | 11-018-164 | 03-408-608-303 |
| 1784-PKTX | MA40-7073 | 1756-IM16I |
| SPIDER 5TX | MSD5AZA1Y | 2711P-K6C5D |
Send the full catalog number, firmware revision, expansion hardware, port requirements, quantity and delivery destination for a precise quotation.
CONTACT MIYA ZHENG| Returns & replacement | Contact us within 7 days after receipt if an issue occurs. Returned items must remain in their original condition and include the return reason. A replacement or refund is arranged after receipt and inspection. Return shipping costs are the buyer's responsibility. |
| Ordering details | Provide the quantity, delivery country, complete label, firmware revision, installed expansion hardware and network requirements. Availability and lead time are confirmed with the quotation. |
Product module 2090-UXNFBMP-S15 Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 2.02kg Production year 2024 country of origin USA
Product module 1747-L514 Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.24kg Production year 2024 country of origin USA
Product module 1756-TBCH Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.14kg Production year 2024 country of origin USA
Product module 1747-BA Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.02kg Production year 2024 country of origin USA
Product module 1756-L62 Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.34kg Production year 2024 country of origin USA
Product module 1756-BA1 Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.01kg Production year 2024 country of origin USA
Product module MMS6110 Brands Emerson Payment Paypa/TT Condition 100% New Weight 0.3KG Production year 2024 country of origin USA
Product module 1756-OB16E Brands Allen Bradley Payment Paypa/TT Condition 100% New Weight 0.2kg Production year 2024 country of origin USA
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported