Siemens 6ES7193-6BP00-0BA0

SIMATIC ET 200SP BaseUnit BU15-P16+A0+2B with BU type A0, Push-in terminals, without AUX terminals and bridged to the left.

Product & Technical Snapshot

Where the BaseUnit Fits

ET 200SP Architecture

The BU15-P16+A0+2B is used as a BaseUnit within the SIMATIC ET 200SP distributed I/O system. Its A0 design provides the physical connection point for the associated ET 200SP module.

Connection Arrangement

Push-In terminals support field wiring, while the unit is designed without AUX terminals and continues the potential group from the left side.

Replacement Situations

This part may be searched when an ET 200SP station requires a matching A0 BaseUnit, when a BaseUnit has mechanical damage, or when a maintenance replacement is needed to restore the station.

6ES7193-6BP00-0BA0 FAQ

Yes. It is a SIMATIC ET 200SP BaseUnit, type A0, designated BU15-P16+A0+2B.

The BaseUnit uses Push-In terminals and is designed without AUX terminals.

Yes. The potential group arrangement is specified as continued from the left.

The rated supply value is 24 V DC.

The maximum current carrying capacity for the P1 and P2 bus is 10 A.

Match the replacement by article number and BaseUnit type, then verify the terminal arrangement, AUX-terminal configuration and potential-group arrangement before installation.

If a concern appears after delivery, please contact us within 7 days so the issue can be reviewed promptly.

Returned products should remain in their original condition and be accompanied by the reason for return. A return or replacement can then be arranged after receipt.

Shipping expenses associated with the return are the responsibility of the buyer.

Need Siemens 6ES7193-6BP00-0BA0?

Send the part number, quantity, destination, required date and machine/system details for a faster response.