SCHNEIDER ELECTRIC / ALTIVAR PROCESS
|
ATV930D30N4
Altivar Process ATV930
30 kW variable speed drive with integrated braking chopper, designed for industrial motor control applications.
|
30
kW ND
22 kW
HEAVY DUTY
|
|
SUPPLY
380–480 V
|
OUTPUT ND
61.5 A
|
OUTPUT HD
46.3 A
|
PROTECTION
IP21
|
01 / DRIVE PROFILE
Power Conversion for Process Applications
Schneider Electric ATV930D30N4 belongs to the Altivar Process ATV900 family. It is a three-phase variable speed drive for asynchronous and synchronous motors. The model is rated at 30 kW for normal duty and 22 kW for heavy duty, with an integrated braking chopper and EMC filter.
The duty rating is a key selection factor. A 30 kW motor application should not be assumed suitable under every load condition. Confirm motor current, overload requirements, operating cycle and the selected duty before replacement.
02 / ELECTRICAL DATA
Technical Specification
| Parameter |
ATV930D30N4 |
| Product Family |
Altivar Process ATV900 |
| Rated Supply |
380–480 V AC, 3-phase |
| Supply Frequency |
50–60 Hz |
| Normal Duty Power |
30 kW / 40 hp |
| Heavy Duty Power |
22 kW / 30 hp |
| Normal Duty Current |
61.5 A at 4 kHz |
| Heavy Duty Current |
46.3 A at 4 kHz |
| Integrated Braking Chopper |
Yes |
| EMC Filter |
Integrated |
| Degree of Protection |
IP21 / UL Type 1 |
| Mounting |
Wall Mount |
| Motor Types |
Asynchronous / Synchronous |
03 / LOAD CHARACTERISTICS
Two Duty Ratings. One Selection Decision.
|
NORMAL DUTY
30 kW
61.5 A / 4 kHz
40 hp rated motor power under normal-duty conditions.
|
HEAVY DUTY
22 kW
46.3 A / 4 kHz
30 hp rated motor power under heavy-duty conditions.
|
Select the duty according to motor nameplate current, load profile, acceleration requirements, overload demand and operating cycle. The power rating alone is not sufficient for drive sizing.
04 / COMMUNICATION & CONTROL
Connecting the Drive to the Control Network
| Modbus Serial |
Serial communication over RS-485. |
| Modbus TCP |
Ethernet-based communication. |
| EtherNet/IP |
Industrial Ethernet network integration. |
Optional communication modules support selected protocols including PROFINET, PROFIBUS DP V1, DeviceNet, EtherCAT and CANopen. The required module and installation slot must be checked against the network architecture.
Installation Considerations
Install the drive vertically within the specified mounting tolerance. Allow sufficient ventilation space, with at least 100 mm clearance at the specified upper and lower positions and 10 mm at the side position. Avoid nearby heat sources and verify temperature derating and airflow requirements before installation.
AMIKON / DRIVE PROCUREMENT
Get the Right Drive for Your Application.
|
SALES MANAGER
Miya zheng
|
EMAIL
|
WHATSAPP
|
AMIKON LIMITED / GLOBAL INDUSTRIAL PARTS
Dependable Supply. Responsive Service.
|
Amikon Limited has been in the industry for many years and enjoys a good reputation
|
100% Brand New!
Factory Sealed!
|
Warranty:
12 months worldwide!
|
Reduce your support cost.
Reply to you promptly within 24 hours. |
We can accept T/T.
International delivery support. |
05 / ENGINEERING QUESTIONS
Schneider ATV930D30N4 FAQ
1. How should buyers choose between the 30 kW and 22 kW ratings of ATV930D30N4?
The 30 kW rating applies to normal duty, while 22 kW applies to heavy duty. Compare motor nameplate current, load profile, acceleration, overload demand and operating cycle. The corresponding continuous output currents are 61.5 A and 46.3 A at 4 kHz.
2. What cabinet changes might be needed when replacing an existing 30 kW drive with ATV930D30N4?
Check mounting dimensions, cable entry, terminal positions, heat dissipation, ventilation clearances and upstream protection. The published mounting guidance requires vertical installation and sufficient free space. Confirm the actual cabinet layout before ordering.
3. Does Schneider ATV930D30N4 include the braking resistor?
The drive includes an integrated braking chopper, but this does not mean a braking resistor is included. The resistor must be selected separately according to braking energy, resistance limits, power rating and duty cycle.
4. Can ATV930D30N4 communicate directly with a PLC using PROFINET?
PROFINET is supported through the corresponding optional communication module. The standard communication protocols include Modbus serial, Modbus TCP and EtherNet/IP. Verify the required option module, PLC configuration, network addressing and installation slot.
5. What should engineers check when the ATV930D30N4 operates in a high-temperature cabinet?
Review ambient temperature, switching frequency, ventilation, mounting orientation and derating requirements. The installation must provide adequate airflow and specified clearance. Check the applicable temperature and switching-frequency derating curves before finalizing the drive selection.
Return & Replacement Arrangements
Please contact us within 7 days after delivery if an issue occurs. Returned products should remain in their original condition, with the return reason clearly stated. A return or replacement can be arranged after the goods have been received and assessed. Return shipping costs are the buyer's responsibility.
06 / PARTS DISCOVERY
Explore More Popular Models
Contact our team for additional industrial automation components and spare parts.
| YA032HR 7940021586 |
ST320A-100-ASSY |
H16x10A-R11 |
| 017-524666 |
KJ2003X1-BA2 |
7ML5741-2AA00-0 |
| SPW481-53 SPW481 |
DET4TCR/DET4TCR |
DCT1022 |
| 200200-03-03-05 |
8270-274k |
CH-DIM4-D9 |
| MP4M-FC-1.00 |
NPort 5410/EU |
ETN 40 |
| XFT100r2 42T90031 |
X13760335-01 |
1756-IB16IF |
| ST320A-100-ASSY |
456D012058 |
MX-M25M-Sec-Night-N51 |
| IC200UDR010-BG |
6SL3040-1NB00-0AA0 |
RLX2-IHNF |
| ANB10D-415 |
FCS-MB8-SG |
G4514-60610 |
| IPBridge-2 |
V5421B1058 |
PV211 |
| SKDDI0764 |
IC693CPU363-DKRS |
SLXD4 G59 |
| 8270-805 |
ST320A-100-ASSY |
NT21-ST121-E |
| G12-1300 |
V1400R16 |
MB-FB-4R |
| 1msc980010 |
16in/16out |
NS-AHA7002-0 |
| AMP-330-EUR |
QLXD4-H51 |
AMAX-1754 |
| 1MSC980037 |
G12-1300 |
PN:50135165 |
| 9328100-CFC |
SPW482-13 |
ML7425A3005 |
Trust Guaranteed
Customer Support
IPv6 network supported