
| MOTOROLA | PRODUCTSYSTEM FITSUPPLYFAQMODELS | VME / 147 |
The Motorola MVME147-001 combines a 25 MHz MC68030 processor, 4 MB parity-protected DRAM and integrated communications on a double-high VMEbus module for embedded control and legacy system service.
|
25
MHz
|
4
MB DRAM
|
4
SERIAL
|
A32
D32
|
|
BOARD IDENTITY
Read the Hardware Before Moving the SlotThe model suffix, processor rate, memory size, firmware and interface population must be treated as one configuration.
|
|
| Send the full board code, revision, firmware and installed-system details. | REQUEST A MATCH CHECK → |
| MVME147-001 | 25 MHz, 4 MB parity DRAM | Selected processor-board configuration |
| MVME147 family | 16, 25 or 32 MHz configurations | Clock and memory are model-dependent |
| MVME712 transition hardware | Rear I/O breakout path | Required where P2 serial and parallel signals are used |
| MVME162 / MVME167 | Later 68040 VME controllers | Not drop-in substitutes without system review |
| CPU MC68030 |
RAM 4 MB |
I/O LAN / SCSI |
VME A32 / D32 |
Processor speed, memory, EPROM contents, rear I/O, transition hardware and system-controller assignment must be confirmed together.
|
20 YEARS OF PARTS SUPPLY
Legacy Hardware.
|
|
||||
| Contact us within seven days if a concern appears after receipt. | Keep the item in its original condition and state the specific reason. Resolution follows receipt and inspection. | Return-related shipping costs are paid by the buyer. |
| 01 |
MVME147-001 — What must be matched before replacing MVME147-001?
Confirm the exact suffix, processor speed, DRAM capacity, EPROM contents, jumper settings, P2 transition hardware and installed I/O cabling.
|
| 02 |
MVME147-001 — Does MVME147-001 provide Ethernet and SCSI?
Yes. This configuration includes Ethernet and SCSI controllers with local-bus DMA; the external connection path depends on the installed transition hardware.
|
| 03 |
MVME147-001 — Can MVME147-001 be replaced by another MVME147 board with the same front panel?
Not by appearance alone. Clock rate, memory, firmware, jumper positions and interface population can differ across the MVME147 family.
|
| 04 |
MVME147-001 — What should be preserved before removing MVME147-001?
Record switch and jumper positions, cable locations, EPROM labels, battery-backed settings, slot number and system-controller role before disturbing the board.
|
| 05 |
MVME147-001 — What should be checked after installing MVME147-001?
Verify supply rails, seating at P1 and P2, cooling airflow, reset behavior, diagnostic status, serial access and application communication before returning the machine to service.
|
| A6220 | 125800-01 | 3500/42 |
| 135489-03 | ACM12 | IC200CPUE05 |
| IC200CPUE05-EG | IC694CHS392A | IC694ALG223 |
| IC694ALG223-GL | 6ES7132-6BF61-0AA0 | 6ES7647-0AA00-1YA2 |
| 6GK5108-0BA00-2AC2 | 6ES7510-1SK03-0AB0 | GT1155-QSBD |
| LA-166 | A12-FC-XX-C1 | DVS-005I00 |
| EVD0000UC0 | RL4RD022TD 113026 | ML703 KQ07071 |
| 1469470000 | LV430 500-142-508 | 021 17252 000 |
| 947-75TWH | 3SB5235-6HD10 | 6GK5108-0BA00-2AA3 |
| S2SC70D-SA11010 | S2SC70D-SA12010 | A2FVX1-D02010 |
| AFV30D-A41252 | A2FV50D-A412000 | PR6424/00A-110 |
| AIP830-101 | PR6424/006-030 | IS210HSLAH1A |
| A3120/022-000 | KL2101X1-BB1 | 160765-10 |
| A6740-12-N | EC402-51 | A2SAT105-S000 |
| FU20-05-T1-NPT | IS220PSCAH1B | ALE111-SE1 |
| EZ1000 | 330180-51-00 | DS822.OD110 |
| 204-450-000-002 | ADV569-P00 | CP451-10 |
| PR6423/003-030 | 179986-01 | 3500/22 |
| 146031-01 | TCM4355X | K9203A |



Inventory Products


More than 40.000.000 products available and worldwide support