
|
△ ANALOG ACQUISITION
MLF-AD04A
4-Channel Voltage / Current Input
Per-channel voltage or current selection for mixed analog measurement in Honeywell MasterLogic applications.
|
FOUR INPUT LANES
|
| ◉ Sales manager: Miya zheng | ✉ Email: sales@amikon.cn | ☎ WhatsApp: 86-18020776792 |
| Input channels | 4 |
| Selectable ranges | 0-10 V, 0-20 mA, 4-20 mA |
| Input resistance | 1 MOhm minimum for voltage; 250 Ohm for current |
| Resolution | 1/4000 |
| Voltage increment | 2.5 mV |
| Current increment | 5 microampere |
| Maximum conversion | 1.5 ms per channel |
| Accuracy | Within +/-0.5% |
| Isolation | Photocoupler between terminals and supply |
| External supply | 24 VDC |
| MLF-AD04A 4 voltage/current inputs. Advantage: per-channel range selection. Use: for sensor acquisition. |
MLF-DV04A 4 voltage outputs. Advantage: direct 0-10 V commands. Use: for voltage-driven actuators. |
MLF-DC04A 4 current outputs. Advantage: robust current-loop commands. Use: for 4-20 or 0-20 mA devices. |
MLF-AH04A 2 inputs plus 2 outputs. Advantage: mixed analog duty. Use: when both directions are needed in one slot. |
|
01 / Responsive Team
|
02 / Product Check
|
03 / Worldwide Dispatch
|
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| 01 | Can MLF-AD04A mix voltage and current channels? | Yes. Range selection is available per channel, but wiring and program scaling must match each selected range. |
| 02 | Can a 4-20 mA transmitter be wired without checking loop power? | No. Determine whether the transmitter is two-wire or externally powered and design the 24 V loop accordingly. |
| 03 | Why can an MLF-AD04A value be incorrect even when wiring is sound? | A mismatch between the hardware range and program scaling can produce incorrect engineering values. |
| 04 | When is MLF-AH04A preferable? | Use the mixed module when the station needs two analog inputs and two analog outputs rather than four inputs. |
| 05 | What should be checked for noise-sensitive signals? | Use suitable twisted shielded cable, separate analog wiring from power conductors and apply the site grounding practice. |
|
Confirm the exact configuration before purchase
Send the complete part number, wiring requirement and quantity.
|
REQUEST A QUOTE |
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |



Inventory Products


More than 40.000.000 products available and worldwide support