The 762 VITO converts the connected VITO probe signals into temperature data for a compatible Honeywell Enraf tank gauging instrument. The 2074120-D04 identity is associated with the LT interface arrangement and must be matched to the installed probe and gauge configuration.
Exact identity first.
Match the complete model, installed role, system family and physical configuration before substitution.
The 762 VITO converts the connected VITO probe signals into temperature data for a compatible Honeywell Enraf tank gauging instrument. The 2074120-D04 identity is associated with the LT interface arrangement and must be matched to the installed probe and gauge configuration.
The 762 VITO sits between the tank-mounted temperature probe and the associated Honeywell Enraf gauge. Compatible gauge families include the 854 servo gauge, 97x SmartRadar instruments and the 877 FDI. The gauge powers the interface over the communication pair, so polarity, shielding, bonding and the exact probe type are part of the system design.
System boundary
Confirm the complete assembly, companion hardware, wiring topology and installed revision. Similar appearance does not prove compatibility.
03
Technical Specifications
Gauge link
Single twisted pair
Link function
Intrinsically safe supply and data on the same pair
Supported sensor context
VITO average-temperature probe chain
Housing role
Field interface enclosure
Cable shield
Grounded at both ends
Electrical class
Intrinsically safe input/output circuits
04
System Integration & Compatibility
The 762 VITO sits between the tank-mounted temperature probe and the associated Honeywell Enraf gauge. Compatible gauge families include the 854 servo gauge, 97x SmartRadar instruments and the 877 FDI. The gauge powers the interface over the communication pair, so polarity, shielding, bonding and the exact probe type are part of the system design.
Treat the circuit as an intrinsically safe installation and follow the site hazardous-area rules.
02
Use the specified twisted pair to the gauge; terminate the shield to ground at both ends.
03
Bond the interface and probe assembly correctly and seal entries against water ingress.
04
Before closing the enclosure, keep wiring clear of the cover thread, clean the thread and preserve the enclosure seal.
20 Years of Industrial Automation Supply
Global customer coordination
Inspection-focused preparation
Urgent international dispatch
Fast response, careful part matching and intercontinental delivery support for current and hard-to-find automation hardware.
07
Technical FAQ
01
Can 762 VITO 2074120-D04 be selected from the interface name alone?
No. Confirm the probe family, LT arrangement, associated gauge option, hazardous-area requirements and complete order identity.
02
Does 762 VITO 2074120-D04 need a separate field power cable?
The associated gauge supplies intrinsically safe power and communication over the same twisted pair for the applicable VITO arrangement.
03
Can 762 VITO 2074120-D04 be connected to any tank gauge?
No. Use a compatible Honeywell Enraf gauge with the correct temperature option and configuration.
04
What cabling details matter most for 762 VITO 2074120-D04?
Pair polarity, cable shielding, grounding at both ends, bonding, cable-entry sealing and separation required by the hazardous-area design.
05
What should be verified after replacing 762 VITO 2074120-D04?
Verify probe wiring, pair polarity, shield continuity, enclosure sealing, gauge communication and plausible temperature values across the probe chain.
08
Recommended Models
E3T-ST13R
BGS-DL10CN
C98043-A1603-L11
PM866AK02 3BSE081637R1
DS100 DSN100
1747-M12
140ACO13000
33-0941D
FC-SDI-1624
SC-UCMX01 51307195-175
51402573-100
X20SLX910
IC695CMM002
EZ1080-RM-00-005
S0612LSER2
VE4035S2B5
DR5000
PM864AK02 3BSE018164R1
851020-120VAC
PR9268/201-000
3HAC026114-009
17L65104S-LW4
F3 DIO 8/8 01
2198-H008-ERS
NX-ID6142-5
F8652X
A393.CG-20
6GK1900-0KB00-0AC0
PR6424/003-130
1747-M13
KC4011X1-BZ1
5X00300G02
TG111-HP3NZRL
571-200-20
6SE7090-0XX87-4AH0
FM19856
11-312E-06-HP
CC-PDOD51 51454408-175
CE4035S2B5
1394-SJT22-C
PR6423/008-110
8C-PCNT01 51454363-175
PR6423/11R-131
IC695CPU315-CG
MVME55006E-0163
FC-SDOL-0424
MVI69L-MBS
CC-TAOX01
FC-QPP-0001 V1.3
PK602HK001
E3S-AD32
DC-TDIL01 51307780-176
MVME55006E-0161R
KJ4006X1-BD1
ST201M-K2
A5F00111301-008
289041 H19A
AN-X2-AB-DHRIO
PR6423/010-000
SIP10
09
Ordering Information
Send the complete product identity
Include the full model, part number, quantity, installed revision, condition requirement and destination. This supports exact-match checking and a clearer quotation.
Return & replacement terms
Contact us within 7 days of receipt if an issue is found. Returned goods must remain in their original condition and include the specific reason. Return or replacement is arranged after receipt and inspection; return shipping costs are the buyer's responsibility.