
|
◆ NON-CONTACT ROTOR MEASUREMENT
PR6423/01K-010
8 mm Eddy Current Sensor
Built for shaft vibration, axial position, eccentricity or speed duty on medium shafts. The sensor works as part of a calibrated sensor, cable and converter chain.
|
8 mm
TIP DIAMETER
|
| ±1.0 mm position MEASURING SPAN |
8 V/mm ±1.0% SENSITIVITY |
0 to 20 kHz FREQUENCY RESPONSE |
| ◉ Sales manager: Miya zheng | ✉ sales@amikon.cn | ☎ 86-18020776792 |
|
CORE SENSOR PERFORMANCE
PR6423 Series
8 mm Eddy Current Sensor
|
EXACT CONFIGURATION CHECK
01K-010
Legacy Full-Code Replacement Control
|
| Series | Tip / shaft | Position / vibration | Sensitivity / thread | Best selection case |
| PR6422 | 5 mm tip Shaft ≥20 mm |
±0.5 mm position 0-250 µm p-p vibration |
16 V/mm ±1.5% M6×0.5 or 1/4-28 UNF |
Small shafts, tight mounting space and high displacement sensitivity. |
| PR6423 | 8 mm tip Shaft ≥25 mm |
±1.0 mm position 0-500 µm p-p vibration |
8 V/mm ±1.0% M10×1 or 3/8-24 UNF |
General medium-shaft vibration, axial position, eccentricity and speed duty. |
| PR6424 | 16 mm tip Shaft ≥80 mm |
±2.0 mm position 100-1000 µm p-p vibration |
4 V/mm ±1.5% M18×1.5 or 3/4-16 UNF |
Large rotating shafts needing greater displacement range than PR6423. |
| PR6425 | 16 mm tip Large shafts |
±2.0 mm position 100-1000 µm p-p vibration |
4 V/mm ±2.0% M18×1.5 |
High-temperature installations up to 380°C where PR6424 temperature capability is insufficient. |
| PR6426 | 32 mm tip Shaft >200 mm |
±4.0 mm static range 8 mm calibrated span |
2 V/mm ±1.5% max 80×40 mm mounting plate |
Very large turbine, compressor, pump or fan shafts requiring the widest standard span. |
|
|
WHY CHOOSE AMIKON?
Keep critical rotating equipment moving.
|
||||||||||
| ◉ Sales manager: Miya zheng | ✉ sales@amikon.cn | ☎ 86-18020776792 |
| Can PR6423/01K-010 be replaced by another PR642x sensor? Only when tip size, calibrated range, sensitivity, mounting, cable, termination and converter pairing all match the machine design. |
Which converter should be ordered with CON021 for LEMO-ended chain. Confirm converter calibration for the exact sensor family and range. |
| What must be measured before ordering Check shaft diameter, probe gap, mounting clearance, thread or plate, cable route, connector and total installed cable length. |
Can the cable on PR6423/01K-010 be shortened or extended in the field? Do not alter a calibrated chain. Cable length affects the electrical system and must match the ordered configuration. |
| What should accompany a purchase request for Provide the complete nameplate code, installed converter code, shaft size, mounting geometry, connector style, cable route and required approvals. |
|
| 330101-00-12-05-02-02 | AX-DIM4-MI5 | BZE6-2RN | GE CR2940U202 | 7EX290.50-1 |
| X20AI2237 | 900-2RS | LQSE-4S10-D | REG-K/230/600 | GE CR2940U202 |
| 4906-9127 | 6SE7034-6EE85-1AA0 | 6SL3225-0BE37-5AA0 | NBG-12LX | HD-YLBSQ-1 |
| MYQ-SGC2WCH | PL-FD113S | EM-07E | 3RU2116-1AB0 | VAV-SD2A |
| 60-1281-01 | KJ4001X1-CC1 | KJ4001X1-CB1 | AVPLY-R9200 | 1SVR405650R0000 |
| T6861H2WB-M | TXM1.8D | 1109S | CL-317-619 | KFD2-CRG2-1.D |
| WAGO 750-323 | PW482-10 | GHQ6310062R0111 | DDNP1501 | AJ65BTB2-16D |
| 7402-040-01 | 6ES7323-1BL00-0AA0 | PL-FD113S | 3RU2116-1AB0 | FU5200 |
| PFD-402-N1 | DDNP1501 | MFM384-RC | 947-75TWH | 3SB5235-6HD10 |
| 6GK5108-0BA00-2AA3 | J9735A 2920/2930M | 700-K40E-ZY | DSCS116 57520001-BZ | 150-F135NBDB |
|
Request availability for PR6423/01K-010
Send the complete installed-chain code for a precise quotation.
|
EMAIL FOR A QUOTE → |
| ◉ Sales manager: Miya zheng | ✉ sales@amikon.cn | ☎ 86-18020776792 |



Inventory Products


More than 40.000.000 products available and worldwide support