
The Bently Nevada BA21504-00-08-10-02 is an 8 mm standard-mount proximity probe for use in a compatible 7200 Proximity Transducer System. Its configuration includes a 0.0 mm unthreaded length option, an 80 mm overall case length option, a 1.0 m integral cable and a miniature male coaxial connector. It is used as part of a matched measurement chain for machinery position and vibration monitoring.
| Probe diameter 8 mm |
Case length 80 mm |
Integral cable 1.0 m |
Connector Miniature male coaxial |
| Manufacturer | Bently Nevada |
| Model / family | 21504 / 7200 Proximity Transducer Systems |
| Mounting type | Standard mount |
| Thread | 3/8-24 |
| Unthreaded length option | 00 — 0.0 mm option |
| Lead armor | Unarmored lead configuration |
The probe operates as part of an eddy-current proximity measurement chain. When installed with a compatible extension cable and Proximitor, it senses the relative position of a conductive target without mechanical contact. The resulting signal can be used by the monitoring system to evaluate shaft displacement, vibration or other configured machinery measurements.
| Target sensing Measures changes in the gap between the probe tip and a conductive target. |
Signal chain Works with the matched 7200 system components and correct calibration. |
Condition monitoring Supports monitoring of rotating machinery movement and vibration. |
| Input supply | -17.5 to -26 VDC; maximum consumption 12 mA |
| Calibrated range | 80 mil (2.0 mm), beginning approximately 10 mil (0.25 mm) from the probe face |
| Extension cable | Verify cable type and total electrical length against the 7200 system configuration. |
| Proximitor | Use the compatible 7200 series unit and confirm calibration requirements for the complete chain. |
The probe should not be evaluated as an independent plug-in sensor. Probe, cable and Proximitor selection must be checked as a complete measurement system.
| 01 | Check the probe model, 8 mm tip, 3/8-24 thread and cable/connector configuration. |
| 02 | Inspect the mounting surface and verify that the installation geometry allows the specified probe clearance. |
| 03 | Install without damaging the probe tip, integral lead or connector; observe the equipment's mechanical requirements. |
| 04 | Connect to the correct extension cable and Proximitor, then set and verify the measurement gap using the approved procedure. |
|
Our services are more professional.
We are a thought leader in the global automation manufacturing industry, committed to promoting global market exchange. No matter how complex your problem is, our experienced professional team will use years of accumulated industry knowledge to provide you with the most efficient solutions. We offer more expertise
A dedicated multilingual support team, a customized customer relationship management and order tracking system, and no rush fees, processing fees, or hidden charges. |
| Delivery estimate | 3–5 days, subject to stock and destination |
| Warranty | 12 months |
| Packaging | Brand new packaging |
| Carriers | DHL / UPS / FedEx / TNT / EMS |
| Payment | T/T |
Additional control, sensing, drive and monitoring components for industrial automation systems.



Inventory Products


More than 40.000.000 products available and worldwide support