Bently Nevada 74712-03-11-02-00 High-Temperature Seismoprobe Velocity Transducer
The Bently Nevada 74712-03-11-02-00 is a high-temperature, two-wire Seismoprobe velocity transducer designed to measure absolute bearing housing, machine casing, and structural vibration. Its moving-coil design produces an output voltage directly proportional to vibration velocity and does not require external power.
The 74712 is used where absolute vibration of a bearing housing, casing, or machine structure must be monitored under elevated temperature conditions. The moving-coil transducer converts mechanical vibration velocity into a proportional voltage signal for machinery monitoring or diagnostic instruments.
Customers commonly look for this configuration when a casing-velocity channel produces an abnormal, unstable, or missing signal, when a transducer is damaged by heat or mechanical stress, or when a maintenance shutdown requires replacement of the exact installed configuration.
On critical rotating equipment, losing a reliable vibration measurement can reduce visibility into changes associated with machine conditions such as unbalance or misalignment. If the affected measurement is part of a protection or condition-monitoring strategy, an unavailable or incorrect signal can complicate troubleshooting and increase the risk of extended downtime.
Our business covers a broad range of automation components, including difficult-to-source and specialized industrial parts. From individual replacement requirements to larger maintenance projects, our team helps customers identify and obtain the parts needed to support their systems.
It measures absolute vibration of bearing housings, machine casings, or structural locations and provides a voltage output proportional to vibration velocity.
The 74712 is the high-temperature version of the Seismoprobe design and is qualified for operation from −29°C to +204°C.
For the 74712 ordering structure, option 03 specifies a 90° ±2.5° mounting orientation with a 4.5 Hz minimum operating frequency.
No. The moving-coil Seismoprobe design generates its vibration-related voltage output without requiring external power.
This configuration includes an isolated circular M10×1 mounting base and a defined mounting orientation. Matching these features helps maintain the intended mechanical installation and measurement characteristics.
Send your Part Number, Quantity, Destination, Required Date, and Machine/System details for a faster quotation process.
The 3500/22M 138607-01 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
The 3500/33 16-Channel Relay Module is a full-height module that provides 16 relay outputs. You can place any number of 16-channel relay modules in any of the slots to the right of the Transient Data Interface (TDI) Module. Each output of the 3500/33 16-Channel Relay Module can be independently programmed to perform voting logic.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The 3500/60 133811-01 modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/72M Recip Rod Position Monitor meets API 618 requirements for reciprocating compressors. It measures: l Rod position l Rod drop l Hyper-compressor The four-channel 3500/72M Recip Rod Position Monitor accepts input from proximity transducers, conditions the signal to provide dynamic and static position measurements, and compares the conditioned signals with userprogrammable alarms. Each channel, depending on how you configure it, typically conditions its input signal to generate various parameters called measured values.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported