Module: 330800-16-15-020-02-02
Country of origin: USA
Original new and one year warranty
Offer you the best service
Bently Nevada 330800-16-15-020-02-02
Application
4-20 mA vibration loop to DCS/PLC – delivers 0-25 mm/s or 0-50 g directly into an AI card, no separate driver.
Pumps, fans, small turbines – magnet or stud mounts on bearing housing, gives early warning of imbalance/misalignment.
Hazardous-area skids – ATEX Ex ia IIC T4 probe head, loop-powered barrier in safe area, keeps cable count low.
Retrofit of 3300/3500 racks – same sensitivity (100 mV/g) and thread (M8 × 1), swap probe, keep monitor.
Remote wellheads or compressors – stainless body, IP68, –55 … +120 °C, survives salt fog and vibration.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = = = =
Product Feature
● Integral 2 m PUR cable – oil-proof, no junction box, fewer points to fail.
●±5 % linearity, 0.5-5 kHz flat response – meets API-670 & ISO 10816 for machine protection.
●Short-circuit & reverse-polarity protected – loop survives 30 V mis-wire without damage.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = =
Call for the best price
|
Sales:Miya |
|
|
Email : |
Phone/WhatsApp: |
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = =
Why Choose Us
●The reason is simple. We offer the best value on quality industrial equipment covered by industry leading buyer protection.
●The Sales Team at Amikon is constantly scanning the web to ensure we are offering the lowest prices possible.
●However, if you think we can do better, feel free to make an offer on any of our products.
●The Offers Team does its best to respond to offers in a timely manner. Typical turn-around time for an offer is 24 hours.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = =
More choices available
|
3BHB003688R0101 |
KJ4001X1-NB1 12P3368X022 |
PR6423/010-110 CON021 |
|
PP836A 3BSE042237R2 |
PR6424/004-010 CON021 |
PR6424/013-140 CON021 |
|
3BHB004744R0010 XVC517 AE10 |
KJ3223X1-BA1 12P2871X022 |
MMS6120 |
|
NGPS13C 3AUA0000042489 |
MMS6312 |
PR6426/000-030 CON021 |
|
PP235 3BSC690102R2 |
SE4036P2 KJ3241X1-BK1 12P4710X042 |
PR6423/013-000-CN |
|
07CT41 1SBP260022R1001 |
WH5D-2FF 1X00416H03 |
PR6423/000-031 |
|
DSAI130H 57120001-NT |
1B30035H01 |
PR6423/015-030 CON021 |
|
PHARPS03000000 |
CON041 PR6423/000-131 |
PR6426/010-030 CON021 |
|
AO895 3BSC690087R1 |
CON041 PR6424/000-121 |
PR6423/004-010 |
|
NPOW-41 58907294H |
1X01046H01L |
PR6423/000-131-CN CON031 |
|
SK-U1-PS1-H1 |
PR6423/015-111 CON041 |
PR6423/004-120-CN CON021 |
|
3BHB005245R0101 |
KJ4001X1-NB1 12P3368X012 |
PR6423/002-001-CN CON041 |
|
3BHE006373R0101 |
PR6423/010-000 CON021 |
PR6423/010-100-CN CON021 |
|
NGPS-12 857803 857804C |
A6312/08 |
PR6426/000-040 CON021 |
|
3BHE028761R1001 GDC806A1001 |
PR6423/000-010 CON021 |
PR6423/011-131 CON031 |
The 3500/22M 138607-01 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.
The 3500/33 16-Channel Relay Module is a full-height module that provides 16 relay outputs. You can place any number of 16-channel relay modules in any of the slots to the right of the Transient Data Interface (TDI) Module. Each output of the 3500/33 16-Channel Relay Module can be independently programmed to perform voting logic.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The 3500/60 133811-01 modules condition these inputs and compare them against user-programmable alarm setpoints. The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.
The 3500/72M Recip Rod Position Monitor meets API 618 requirements for reciprocating compressors. It measures: l Rod position l Rod drop l Hyper-compressor The four-channel 3500/72M Recip Rod Position Monitor accepts input from proximity transducers, conditions the signal to provide dynamic and static position measurements, and compares the conditioned signals with userprogrammable alarms. Each channel, depending on how you configure it, typically conditions its input signal to generate various parameters called measured values.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
The 3500/62 Process Variable Monitor is a 6-channel monitor for processing machine critical parameters that merit continuous monitoring, such as pressures, flows, temperatures, and levels. The monitor accepts +4 to +20 mA current inputs or any proportional voltage inputs between -10 Vdc and +10 Vdc. It conditions these signals and compares the conditioned signals to user-programmable alarm setpoints.
Inventory Products
More than 40.000.000 products available and worldwide support
Trust Guaranteed
Customer Support
IPv6 network supported