Honeywell DCS System

BENTLY NEVADA

Home Brands BENTLY NEVADA

Bently Nevada 330703-000-050-10-12-05 M14 x 1.5 Extended-Range Proximity Probe

Bently Nevada 330703-000-050-10-12-05 M14 x 1.5 Extended-Range Proximity Probe

330703-000-050-10-12-05
3300 XL 11 mm Proximity Probe Series
11 mm Probe Tip
Designed for non-contact measurement of shaft vibration and displacement in a matched proximity transducer system.
01 / TIP DIAMETER
11 mm
Probe family
02 / LINEAR RANGE
4 mm
160 mil
03 / OUTPUT
3.94
V/mm nominal
SALES MANAGER
Miya Zheng
✉ EMAIL CONTACT ☎ WHATSAPP  
BENTLY NEVADA / 3300 XL 11 mm
330703-000-050-10-12-05
M14 x 1.5 Extended-Range Proximity Probe
An extended-range 11 mm probe configured with a 50 mm case, 1.0 m FluidLoc cable and multiple approvals.
Extended-range transducer configuration
M14 x 1.5
Probe case thread
50 mm
Overall case length
1.0 m
Total probe length
PRODUCT OVERVIEW
11 mm probe for increased linear measurement range
The Bently Nevada 330703-000-050-10-12-05 is a 3300 XL 11 mm proximity probe with M14 x 1.5 threads and no armor. Its configuration specifies zero unthreaded length, a 50 mm case, 1.0 m total length, a miniature coaxial ClickLoc connector, FluidLoc cable and multiple approvals.
11 mm tip FluidLoc cable Multiple approvals
TECHNICAL SPECIFICATIONS
Verified operating characteristics
Probe family 3300 XL 11 mm proximity probe
Base model 330703
Thread and armor M14 x 1.5, without armor
Unthreaded length code 000 0 mm
Overall case code 050 50 mm
Total length code 10 1.0 m
Connector code 12 Miniature coaxial ClickLoc connector
Cable construction FluidLoc cable
Approval code 05 Multiple approvals
Nominal sensitivity 3.94 V/mm (100 mV/mil)
Measurement principle Non-contacting eddy-current proximity
System integration
Pair the probe with the correct 3300 XL 11 mm extension cable and Proximitor. Confirm the complete electrical length, connector family, target material and monitor scaling before commissioning.
Selection value
Select this 11 mm configuration when the application needs greater linear range than an 8 mm system. Verify thread, case length, cable option, approvals and matched electronics before substitution.
Application focus
Suitable for radial vibration, shaft position, axial displacement and compressor rod-drop applications where the complete 11 mm transducer chain is supported.
AMIKON Global Supply Support
Twenty Years of Experience
Quality and Fast Response
Factory-sealed supply options, coordinated global delivery, 12-month worldwide warranty and prompt quotation support.
International Parts Network
Return support: Contact us within seven days if a concern is found. Goods must remain in original condition with a clear return reason. Buyer-arranged return freight applies; replacement or refund review starts after receipt.
PROCUREMENT FAQ
Five checks before ordering 330703-000-050-10-12-05
01 Can 330703-000-050-10-12-05 replace an 8 mm probe? No direct substitution should be assumed. The 11 mm system uses different geometry, sensitivity and matched electronics; verify the monitor channel and complete transducer chain.
02 Which mounting geometry is required for 330703-000-050-10-12-05? This configuration uses M14 x 1.5 threads, no armor, zero unthreaded length and a 50 mm overall case. Confirm insertion depth and locknut clearance.
03 What does cable code 12 mean on 330703-000-050-10-12-05? It specifies a miniature coaxial ClickLoc connector with FluidLoc cable. The mating extension cable must use the compatible connector and electrical length.
04 What should be checked before installing 330703-000-050-10-12-05? Confirm target material, probe gap, connector clearance, cable bend radius, grounding, monitor scaling and the available 11 mm target area.
05 What should accompany a quotation for 330703-000-050-10-12-05? Provide the full probe code, extension-cable and Proximitor codes, machine application, mounting dimensions, approval needs, quantity and delivery destination.
Confirm 330703-000-050-10-12-05 for your system
Send the complete model, installed configuration, quantity and required delivery destination.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

Bently Nevada 3500/22M 138607-01 Transient Data Interface Module
Bently Nevada 3500/22M 138607-01 Transient Data Interface Module

The 3500/22M 138607-01 Transient Data Interface (TDI)   is the interface between the 3500 monitoring system and   compatible software (System 1 Condition Monitoring   and Diagnostic software and 3500 System Configuration   software). The TDI combines the function of a 3500/20   Rack Interface Module (RIM) with the data collection   capability of a communication processor such as TDXnet.

Bently Nevada 3500/22M 288055-01 Transient Data Interface
Bently Nevada 3500/22M 288055-01 Transient Data Interface

3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.

Bently Nevada 3500/33 149986-01 16-Channel Relay Module
Bently Nevada 3500/33 149986-01 16-Channel Relay Module

The 3500/33 16-Channel Relay Module is a full-height module   that provides 16 relay outputs. You can place any number of   16-channel relay modules in any of the slots to the right of the   Transient Data Interface (TDI) Module.   Each output of the 3500/33 16-Channel Relay Module can be   independently programmed to perform voting logic.

Bently Nevada 3500/60 163179-01 Temperature Monitor Module
Bently Nevada 3500/60 163179-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The modules condition these inputs and   compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/60 133811-01 Temperature Monitor Module
Bently Nevada 3500/60 133811-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The 3500/60 133811-01 modules condition   these inputs and compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor
Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor

The 3500/72M Recip Rod Position Monitor meets API 618   requirements for reciprocating compressors. It measures:   l Rod position   l Rod drop   l Hyper-compressor   The four-channel 3500/72M Recip Rod Position Monitor   accepts input from proximity transducers, conditions the   signal to provide dynamic and static position measurements,   and compares the conditioned signals with userprogrammable alarms.   Each channel, depending on how you configure it, typically   conditions its input signal to generate various parameters   called measured values.

Bently Nevada 3500/62 163179-03 Process Variable Monitor
Bently Nevada 3500/62 163179-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Bently Nevada 3500/62 133811-03 Process Variable Monitor
Bently Nevada 3500/62 133811-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Quality | Reliability | Integrity

More than 40.000.000 products available and worldwide support

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact