Honeywell DCS System

BENTLY NEVADA

Home Brands BENTLY NEVADA

Bently Nevada 330104-00-05-90-02-05 M10 x 1 Armored Proximity Probe

Bently Nevada 330104-00-05-90-02-05 M10 x 1 Armored Proximity Probe

EQUIPMENT ID
BENTLY NEVADA
330104
3300 XL / 8 mm
 
M10 × 1
Armored Metric
Proximity Probe
▥ ━ ◇
9.0 m LEAD
330104-00-05-90-02-05 3300 XL SERIES
PRODUCT TYPE
3300 XL 8 mm
Proximity Probe
CONDITION
Brand New
In Stock
COUNTRY OF ORIGIN
USA
WARRANTY
12 Months
 
 
 
◆  BENTLY NEVADA / 3300 XL 8 mm
330104-00-05-90-02-05
M10 x 1 Armored Proximity Probe

A metric 3300 XL 8 mm probe for non-contacting shaft vibration and axial position measurement. The complete order code controls its mounting geometry, lead construction, connector protection and hazardous-area approval scope.

◆  ARMORED METRIC PROBE ●  9.0 m SYSTEM PATH ✓  APPROVAL OPTION 05
 
ORDER-CODE ANATOMY
Decode every field before purchase
330104
M10 x 1 + armor
0 mm
unthreaded
50 mm
case
9.0 m
total lead
02
standard, no protector
05
CSA / ATEX / IECEx
Buyer checkpoint: the family number alone is not enough. Match all five suffix groups and the complete installed transducer-system length.
 
ENGINEERING PROFILE
Electrical and mechanical fit at a glance
Probe family 3300 XL 8 mm
Case thread M10 x 1
Construction Armored standard mount
Probe temperature -52 to +177 C
Tip material PPS
 
System scale factor 7.87 V/mm nominal
Frequency response 0 to 10 kHz
Minimum flat target 15.2 mm diameter
Recommended shaft 76.2 mm minimum
Maximum M10 engagement 15 mm
 
SELECTION LOGIC
Choose the configuration by installation need
330104-00-05-90-02-05

Best for a long nine-meter route needing a short metric armored case and standard cable without a connector protector.

330103 family

Choose for M10 x 1 mounting when an unarmored probe lead is specified.

330102 family

Choose only for 3/8-24 UNF mounting with an armored lead.

 
GLOBAL AUTOMATION SUPPLY
Parts expertise that keeps production moving
 
 
Listen. Think. Solve.

AMIKON supplies industrial automation and control-system components across PLC, DCS, safety, turbine, vibration-monitoring and robotic platforms.

◆ Broad reach: established and difficult-to-find components across major OEM platforms.
◆ Practical support: multilingual order coordination and fast response for urgent requirements.
◆ Supply continuity: global component sourcing that helps reduce production downtime.
 
PURCHASE FAQ
Five checks that reduce ordering risk
 
What dimensions must be confirmed for Bently Nevada
Match the M10 x 1 thread, 0 mm unthreaded section, 50 mm overall case and 9.0 m probe lead before ordering.
 
Does Bently Nevada 330104-00-05-90-02-05 require a separate extension cable?
No. Its full 9.0 m lead connects directly to a compatible 9 m 3300 XL 8 mm Proximitor Sensor.
 
What cable and connector construction comes with Bently Nevada
This order uses ClickLoc connector without protector; standard cable. Confirm cabinet clearance and the installed connector arrangement.
 
What target and mounting checks matter for Bently Nevada
Confirm conductive target material, shaft diameter, probe-tip separation, bracket rigidity, thread engagement and the required initial gap.
 
What should be inspected when Bently Nevada 330104-00-05-90-02-05 arrives?
Check the PPS tip, M10 x 1 thread, stainless-steel armor, cable transition, ClickLoc connector, full marking and any evidence of impact or tight bending.
 
AVAILABLE COMPONENTS
More industrial automation models
6ES7431-7KF10-0AB0 6ES7422-1BL00-0AB0 7KG8000-8AB20/FF 6DP1614-8BB 6DP1230-8CC
6DP1511-8AA 9907-028 8290-184 5438-667 AM-SA85-000
AS-S908-110 ATV61HD37N4 LXM15MD28N4 ME4U07AAA 3704E
3721 DSCA120 57520001-P YXT115B 4890024-NK YXU149B YT296000-MZ CI590 3BHT340092R1
INFI90 INFI 90 CI615 3BHT300024R1 330192-00-25-10-00 330232-05-10-12-05 100630-00-43-05-01
100630-00-60-05-01 330750-20-05 21500-00-28-10-02 TC-HAO081 TC-IDA161
900G02-0102 900H03-0102 NTDI21-A 51403299-200 1746-P5
1756-L83E 80026-044-06-R 1394-AM07 1394C-SJT10-T-RL 2711-B5A1
ADV141-S13 S1 ADV142-P10 S1 ADV551-P53 S2 SSB401-13 SAI143-S63
EB401-10 S1 SNT401-13 PR6423/000-010 CON021 PR6424/000-121 CON041 PR6423/004-111 CON041
 
AFTER-DELIVERY CARE
A clear three-step resolution path
01
Contact within seven days

Send the order details, photographs and a clear description of the concern.

02
Keep the item complete

Approved returns must retain original condition, packaging and supplied accessories.

03
Inspection and resolution

Return or replacement follows receipt and inspection; return shipping remains the buyer's responsibility.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

Bently Nevada 3500/22M 138607-01 Transient Data Interface Module
Bently Nevada 3500/22M 138607-01 Transient Data Interface Module

The 3500/22M 138607-01 Transient Data Interface (TDI)   is the interface between the 3500 monitoring system and   compatible software (System 1 Condition Monitoring   and Diagnostic software and 3500 System Configuration   software). The TDI combines the function of a 3500/20   Rack Interface Module (RIM) with the data collection   capability of a communication processor such as TDXnet.

Bently Nevada 3500/22M 288055-01 Transient Data Interface
Bently Nevada 3500/22M 288055-01 Transient Data Interface

3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.

Bently Nevada 3500/33 149986-01 16-Channel Relay Module
Bently Nevada 3500/33 149986-01 16-Channel Relay Module

The 3500/33 16-Channel Relay Module is a full-height module   that provides 16 relay outputs. You can place any number of   16-channel relay modules in any of the slots to the right of the   Transient Data Interface (TDI) Module.   Each output of the 3500/33 16-Channel Relay Module can be   independently programmed to perform voting logic.

Bently Nevada 3500/60 163179-01 Temperature Monitor Module
Bently Nevada 3500/60 163179-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The modules condition these inputs and   compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/60 133811-01 Temperature Monitor Module
Bently Nevada 3500/60 133811-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The 3500/60 133811-01 modules condition   these inputs and compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor
Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor

The 3500/72M Recip Rod Position Monitor meets API 618   requirements for reciprocating compressors. It measures:   l Rod position   l Rod drop   l Hyper-compressor   The four-channel 3500/72M Recip Rod Position Monitor   accepts input from proximity transducers, conditions the   signal to provide dynamic and static position measurements,   and compares the conditioned signals with userprogrammable alarms.   Each channel, depending on how you configure it, typically   conditions its input signal to generate various parameters   called measured values.

Bently Nevada 3500/62 163179-03 Process Variable Monitor
Bently Nevada 3500/62 163179-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Bently Nevada 3500/62 133811-03 Process Variable Monitor
Bently Nevada 3500/62 133811-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Quality | Reliability | Integrity

More than 40.000.000 products available and worldwide support

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact