Honeywell DCS System

BENTLY NEVADA

Home Brands BENTLY NEVADA

Bently Nevada 330103-02-08-10-02-00 Standard-Mount Proximity Probe

Bently Nevada 330103-02-08-10-02-00 Standard-Mount Proximity Probe

Probe Length

8 mm

Detection Range

Up to 50 mm

Signal Output

4-20 mA

Environmental Rating

IP67

Operating Temperature

-40°C to +85°C

◆  BENTLY NEVADA / 3300 XL 8 mm
330103-02-08-10-02-00
M10 x 1 Standard-Mount Proximity Probe

A standard-mount, unarmored eddy-current probe for non-contact shaft vibration and position measurement in a complete 3300 XL 8 mm transducer system.

0.2 in
Unthreaded length
0.8 in
Case length
1.0 m
Total length
 
 
◆  Sales manager: Miya zheng ✉  sales@amikon.cn ☎  86-18020776792
◉   01   ORDER-CODE MAP
Every field changes the delivered probe
330103
Probe family
02
Unthreaded length
08
Case length
10
Total length
02
Connector / cable
00
Approvals
■   02   TECHNICAL MATCH
Dimensions, construction and system pairing
Probe series 3300 XL 8 mm
Body style Standard mount, without armor
Case thread M10 x 1
Unthreaded length 0.2 in
Overall case length 0.8 in
Total probe length 1.0 m
Connector Miniature coaxial ClickLoc, standard cable
Approval option Not required
Probe tip diameter 8.0 mm
System pairing 3300 XL 8 mm Proximitor Sensor; one-metre system uses no extension cable
○   03   MODEL CHOICE
Choose by thread and cable protection
330103
M10 x 1, without armor

Best where flexible cable and metric mounting are specified.

330104
M10 x 1, with armor

Choose when the cable route needs mechanical protection.

330101
3/8-24 UNF, without armor

Choose only for the matching imperial thread.

◆  Sales manager: Miya zheng ✉  sales@amikon.cn ☎  86-18020776792
AMIKON LIMITED
Listen. Think. Solve.

Multi-brand automation support for PLC, DCS, safety, drives, turbine control and condition-monitoring components.

◆  Broad spare-parts coverage
◆  Experienced order support
◆  International delivery network
 
✦   05   PURCHASE FAQ
Five checks that prevent an incorrect installation
Q1What must match before ordering Bently Nevada 330103-02-08-10-02-00?
Confirm M10 x 1 thread, 0.2-inch unthreaded length, 0.8-inch case, 1.0-metre length, unarmored cable, connector and approval code.
Q2Does Bently Nevada 330103-02-08-10-02-00 require an extension cable?
A one-metre 3300 XL system connects the probe directly to the matching one-metre Proximitor Sensor; an extension cable is not used.
Q3Can Bently Nevada 330103-02-08-10-02-00 replace a 330104 probe?
Only if removal of armor is acceptable and cable routing remains protected; mechanical dimensions and every suffix must still match.
Q4What should be inspected when Bently Nevada 330103-02-08-10-02-00 arrives?
Inspect the tip, M10 thread, cable jacket, case-to-cable transition, ClickLoc connector and complete marking.
Q5What should be checked during commissioning of Bently Nevada 330103-02-08-10-02-00?
Verify AISI 4140 target assumptions, shaft diameter, initial gap, bracket rigidity, cable routing and monitor scaling.
◆  Sales manager: Miya zheng ✉  sales@amikon.cn ☎  86-18020776792
◉   06   RECOMMENDED MODELS
More industrial automation components
VS2EXR-24 AKB336-M025 FG1020-050 AET4D-05 A456CFBS
AKB336-M025 ICX35-HWC-E VLD-362-FF DFM1H0CC05 203-779-001
XBTAULBY3T3BNNR JGL36200 ABB 001-1004-03 45950-05 D0-06DD2-D
C2N-VEQ4 TES 1353 SGE985-S7EAAN 13000 11030-93 5610-16 RS-232
323-300033-040 SXWRPV5A10001 175G9010 201T4 10P59600005 MAP110-4200C
A3C40173228 F01U033343 UNC-520-2-N M9120-E512LPUF 2711-M3A 18L1
CP2218-0010 935967-912 HMIBSU0ND1001 AAP135-S53 1492-RCD2A25
EY-IO530F001 9179BNMD KIT64-NKAU SCB210C88V 5-N MIMO-5GHz
IA5150A-T TPMC-4SM-BS BAC-5901CE IPD1248C-T KIT-CB4-1-PC
SNAT7600 99-5835-01 ACS550-01-023A-4 IC200ALG630 51202329-202
■   07   AFTER-DELIVERY SUPPORT
01   Contact within 7 days
Send order details, photographs and a clear description.
02   Keep original condition
Approved returns must retain packaging and accessories.
03   Inspection and resolution
Return or replacement follows receipt and inspection; return shipping remains the buyer's responsibility.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

Bently Nevada 3500/22M 138607-01 Transient Data Interface Module
Bently Nevada 3500/22M 138607-01 Transient Data Interface Module

The 3500/22M 138607-01 Transient Data Interface (TDI)   is the interface between the 3500 monitoring system and   compatible software (System 1 Condition Monitoring   and Diagnostic software and 3500 System Configuration   software). The TDI combines the function of a 3500/20   Rack Interface Module (RIM) with the data collection   capability of a communication processor such as TDXnet.

Bently Nevada 3500/22M 288055-01 Transient Data Interface
Bently Nevada 3500/22M 288055-01 Transient Data Interface

3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.

Bently Nevada 3500/33 149986-01 16-Channel Relay Module
Bently Nevada 3500/33 149986-01 16-Channel Relay Module

The 3500/33 16-Channel Relay Module is a full-height module   that provides 16 relay outputs. You can place any number of   16-channel relay modules in any of the slots to the right of the   Transient Data Interface (TDI) Module.   Each output of the 3500/33 16-Channel Relay Module can be   independently programmed to perform voting logic.

Bently Nevada 3500/60 163179-01 Temperature Monitor Module
Bently Nevada 3500/60 163179-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The modules condition these inputs and   compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/60 133811-01 Temperature Monitor Module
Bently Nevada 3500/60 133811-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The 3500/60 133811-01 modules condition   these inputs and compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor
Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor

The 3500/72M Recip Rod Position Monitor meets API 618   requirements for reciprocating compressors. It measures:   l Rod position   l Rod drop   l Hyper-compressor   The four-channel 3500/72M Recip Rod Position Monitor   accepts input from proximity transducers, conditions the   signal to provide dynamic and static position measurements,   and compares the conditioned signals with userprogrammable alarms.   Each channel, depending on how you configure it, typically   conditions its input signal to generate various parameters   called measured values.

Bently Nevada 3500/62 163179-03 Process Variable Monitor
Bently Nevada 3500/62 163179-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Bently Nevada 3500/62 133811-03 Process Variable Monitor
Bently Nevada 3500/62 133811-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Quality | Reliability | Integrity

More than 40.000.000 products available and worldwide support

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact