
|
POWER CAPACITY
1746-P1SLC 500 Chassis Power Supply
Provides regulated backplane power for a modular SLC 500 chassis and a limited 24V DC user supply for suitable auxiliary loads. |
![]() |
| 85-132 / 170-265V AC | 2A at 5V DC | 0.46A at 24V DC |
| Sales manager: Miya zheng | Email: sales@amikon.cn | WhatsApp: 86-18020776792 |
| Input voltage | 85-132V AC or 170-265V AC, 47-63 Hz |
| Backplane capacity at 5V | 2.0A |
| Backplane capacity at 24V | 0.46A |
| User supply | 0.2A at 24V DC |
| Maximum inrush | 20A |
| Operating temperature | 0 to 60 deg C; derate current capacity 5% above 55 deg C |
| Relative humidity | 5% to 95%, noncondensing |
| Recommended conductor | #14 AWG / 2 mm2 |
| 01 | Calculate chassis demand Total every module's 5V and 24V backplane demand before selecting the supply. |
Decision: Both current totals must remain below P1 capacity. |
| 02 | Match the incoming line Confirm cabinet voltage, frequency and the correct 120V or 240V wiring arrangement. |
Decision: Do not energize until the line connection is verified. |
| 03 | Separate auxiliary field demand Keep the user 24V load within 0.2A and provide an external supply for larger loads. |
Decision: Never treat the P1 user output as general field power. |
| Model | Main difference | When to use |
| 1746-P1 | AC input; 2A at 5V; 0.46A at 24V | Small SLC 500 chassis with verified light backplane demand. |
| 1746-P2 | AC input; 5A at 5V; 0.96A at 24V | Use when the chassis current exceeds P1 capacity. |
| 1746-P3 | 19.2-28.8V DC input; 3.6A at 5V | Use where the control cabinet provides 24V DC input power. |
| 1746-P4 | AC input; 10A at 5V; 2.88A at 24V | Use for high-density chassis after total-watt calculation. |

Automation components for PLC, DCS, robot, turbine-control and condition-monitoring systems. Our team coordinates exact catalog matching and practical order support for active and legacy installations.
[01] Broad product coverage helps buyers consolidate difficult automation requirements while maintaining exact model and revision control.
[02] Experienced matching focuses on electrical duty, installed hardware and connection compatibility.
[03] Responsive coordination supports international orders and time-sensitive maintenance needs.
Email Miya zheng WhatsApp| Q1 / 1746-P1 CAPACITY
How should a buyer confirm Allen-Bradley 1746-P1 capacity? Add the maximum 5V and 24V current of every chassis module and keep both totals below the P1 limits. |
Q2 / 1746-P1 REPLACEMENT
Can Allen-Bradley 1746-P1 replace 1746-P2 directly? Only when the chassis load remains within 2A at 5V and 0.46A at 24V; physical fit is not enough. |
| Q3 / 1746-P1 USER OUTPUT
Can the Allen-Bradley 1746-P1 24V user output power all field devices? No. The 0.2A limit means higher-demand loads and emergency circuits need a suitable external supply. |
Q4 / 1746-P1 ARRIVAL
What should be checked when Allen-Bradley 1746-P1 arrives? Inspect terminals, voltage wiring arrangement, chassis connector, casing damage and heat discoloration. |
| Q5 / ALLEN-BRADLEY 1746-P1 BEFORE ENERGIZING What must be verified before Allen-Bradley 1746-P1 is energized? Confirm protective grounding, input-voltage wiring, chassis seating and the complete backplane-current calculation before applying power. |
|
| PR6424/00A-110 | 160765-10 | ADV569-P00 | 6DP1641-8AA | PR6424/006-030 |
| EC402-51 | 330101-00-63-10-02-00 | 6ES5756-0AA11 | A3120/022-000 | FU20-05-T1-NPT |
| 330106-05-30-15-02-CN | IS220PCLAH1A | KL4104X1-BA1 | CP471-01 | 330130-030-01-CN |
| 7400166-380 | AAI143-S00 | 330180-51-00 | IMASI13 | 7400195-210 |
| 145988-02 | 204-450-000-002 | WDP5-118.051-00 | FLXA21-D-P | KL2101X1-BB1 |
| SAI143-S63 | 6AU1425-2AD00-0AA0 | AIP830-101 | A6740-12-N | CP451-10 |
| 6ES5304-3UB11 | IS210HSLAH1A | A2SAT105-S000 | 330103-00-08-05-02-00 | 330901-05-65-05-11-05 |
| A6822 | UT55A-001-11-00 | 21000-28-10-00-098-04-02 | 8750-CA-NS | IS220AEPBH1BAA |
| IS220PSCAH1B | 330180-X0-05 | 7400150-270 | 3500/65 | DS822.OD110 |
| 1771-ASB/E | IQS900 | SC4A-S-PR-NN-002-05-T1 | CP471-00 | SOIA-01 |
| R |
AFTER-DELIVERY SUPPORT
|
| 01 | Contact within 7 days Send order details, photographs and a clear description. |
| 02 | Preserve original condition Retain original condition, packaging and supplied accessories. |
| 03 | Inspection and resolution Return or replacement follows receipt and inspection; shipping remains the buyer's responsibility. |
| Sales manager: Miya zheng | sales@amikon.cn | WhatsApp: 86-18020776792 |



Inventory Products


More than 40.000.000 products available and worldwide support