
| The ABB NDBU-85C is a type of network distribution control unit used in electrical distribution systems. | |
| 1. Electrical Ratings | |
| Nominal Voltage: | 230V AC or 400V AC |
| Frequency: | 50/60 Hz. |
| 2.Control and Monitoring | |
| Display: | LCD or LED |
| 3.Operating Conditions | |
| Temperature Range: |
-5°C and 40°C (23°F to 104°F) |
| 4.Enclosure and Mounting | |
| Enclosure Type: |
IP20, IP65 |
| 1. Device Not Powering On |
|
Possible Causes:Incorrect or disconnected power supply. Solutions:Check Power Connections: Ensure that the power connections are secure and properly connected |
| 2. Faulty Display or Interface Issues |
|
Possible Causes:Display or interface module failure. Solutions:Check Connections: Ensure that all connections to the display or interface module are secure. |
| 3. Inaccurate Monitoring Data |
|
Possible Causes:Sensor calibration issues. Solutions:Calibrate Sensors: Perform calibration checks on the sensors to ensure accurate readings. |
| 4. Communication Failures |
|
Possible Causes:Faulty communication cables or connections. Solutions:Inspect Cables and Connections: Check all communication cables and connections for damage or loose connections. |
You May Like
| ABB | SDCS-IOB-21 3BSE005176R1 | I/O Board |
| ABB | SDCS-PIN-48 3BSE004939R0002 | Pulse Transformation Board |
| ABB | DO880 3BSE028602R1 | Digital Output Module |
| ABB | 3HAC16035-1 | Brake Release Board |
| ABB | CMA124 3DDE300404 | Synpol D Power Measuring Card |
| ABB | CMA131 3DDE300411 | Synpol D Servo-motor Drive Encoder Module |
| ABB | CMA136 3DDE300416 | Synpol D Generator Relay Terminal Board |
| ABB | CMA127 3DDE300407 | Synpol D Control Card Module |
| ABB | CMA35 GVT3605799 | Synpol D Short Circuit Card |
| ABB | CMA122 3DDE300402 | Synpol D Display CPU Card |
| ABB | CMA137 3DDE300417 | Connection Module |
Please contact us and look forward to our cooperation!




Inventory Products


More than 40.000.000 products available and worldwide support