Siemens 6AV3530-1RU31 OP30/C Operator Panel
Product Details
Module fum 230 analog transmitter signal conditioning module 0/4 to 20 MA-16 inputs 0/4 to 20
MA in 2 or 4 wire circuit -transducer supply with 24 v DC-4 limit values per channel -signal
correction possible-monitoring of the transmitter supply, measurement range overshoot and
undershoot and wire break-suitable for redundant use The terminal module is installed,
wired, and fitted with an electronic module.
1. Switch off the supply voltage on the terminal module and, if applicable, the power module
2. Disconnect the wiring on the terminal module
3. Simultaneously press the upper and lower release buttons of the electronic module,and
remove it from the terminal module
Why Choose Us
More products
Siemens | 6AJ5203-3AA70 | Power Module |
Siemens | 6AP1562-0BA11-0AH0 | SICOMP PC32-M |
Siemens | 6AR1302-0AA00-0AA0 | Analog Output |
Siemens | 6ES5928-3UB11 | CPU928B Processor Module |
Siemens | 6ES5928-3UB12 | CPU928B Processor Module |
Siemens | 6AR1025-2AG00-0AA0 | SICOMP IMC01 Operator Panel |
Siemens | 6AR1300-0JD20-0AA0 | SMP16-CPU040 SICOMP Module |
Siemens | 6AV3535-1FA01-0AX0 | OP35 Operator Panel |
Siemens | 6AV3535-1FA01-1AX1 | OP35 Operator Panel |
Siemens | 6AV3520-1EL00 | OP20/240-8 OP20 Operator Panel |
Siemens | 6AV3525-1EA01-0AX0 | OP25 Operator Panel |
Siemens | 6AV3515-1EK30-1AA0 | P15-A1 VF Operator Panel |
Siemens | 6AV3515-1MA01 OP15B | OP15B Operator Panel |
Siemens | 6AV1222-0AA11 | CP2000 CP-C30 Processor Module |
Siemens | 6AV3503-1DB10 | Operator Interface Panel OP3 |