Honeywell DCS System

BENTLY NEVADA

Home Brands BENTLY NEVADA

BENTLY NEVADA 106765-10 Interconnect Cable

BENTLY NEVADA 106765-10 Interconnect Cable

Product module 106765-10
Brands BENTLY NEVADA
Payment Paypa/TT
Condition 100% New
Weight 0.9KG
Production year 2024
country of origin USA

 

BENTLY NEVADA  106765-10 Interconnect Cable


Discription

Part number:106765-10
Sensitivity :3.94mV/mm/s (100 mV/in/s) ±5%.
Frequency Response:4.5 to 2,000 Hz (270 to 120,000 cpm) ±3.0 dB, 6.0 to 1,000 Hz (360 to 60,000 cpm) ±0.9 dB.
Temperature Sensitivity:-14% to +7.5% typical over the operating temperature range.
Velocity Range:1270 mm/s (50 in/s) peak
Transverse Sensitivity:Less than 5% of sensitivity.
Amplitude Linearity:±2% to 152 mm/s (6 in/s) peak
Diemension:28x28x4cm

 

Bently Nevada LLC supplies connecting cables with military-type circular connectors. The cable connector

must be compatible with the 330525 Velomitor® Sensor connector. The 106765-AA cable assembly includes

a quick connect/disconnect connector and clamps to secure and seal the splashresistant boot. The cable

assembly comes with the top clamp secured in position and the bottom clamp looped around the boot. Use

a small screwdriver to open the clamps by prying the teeth of the clamps apart. Slide the boot back to reveal

the connector. This will allow the cable assembly to easily install on the transducer. Once the connector is engaged,

slide the boot down over the connector assembly and top of the transducer. The groove on the inside bottom of the

boot should fit neatly over the lip above the hex flats. The grooves on the outside of the boot at the

top and bottom indicate the placement of the clamps. Secure the clamps with pliers.

Email :sales@amikon.cn

Skype :miyazheng520

Phone/WhatsApp : 86-18020776792

Frequently  Asked Questions About  106765-10

What is the Bently Nevada 106765-10 Interconnect Cable used for?

The 106765-10 Interconnect Cable is used to connect various Bently Nevada monitoring components within a machinery health monitoring system. It facilitates communication between sensors, transducers, and data acquisition systems, ensuring accurate transmission of measurement signals.
What are the key specifications of the 106765-10 Interconnect Cable?
The 106765-10 Interconnect Cable typically features high-quality shielding to reduce electromagnetic interference, flexible and durable insulation materials, and connectors that ensure reliable connections. Exact specifications may vary, so it's important to refer to the product datasheet for detailed information.
Can the 106765-10 Interconnect Cable be used with other Bently Nevada systems?

Yes, this cable is compatible with various Bently Nevada monitoring systems and components, enabling seamless integration into existing setups.

Does the 106765-10 Interconnect Cable require any special installation?

While the cable itself does not require special installation, it is essential to follow the manufacturer's guidelines for proper handling, connection, and routing to ensure optimal performance and reliability.

 

More Recommend Items

Bently Nevada 330173-00-03-10-02-00 3300 5mm Proximity Probes
Bently Nevada 330172-16-42-10-01-00 3300 XL 8 mm Proximity Probes
Bently Nevada 330171-08-24-10-02-00 3300 5 mm Proximity Probes
Bently Nevada 330171-00-08-10-02-00 3300 5 mm Proximity Probes
Bently Nevada 330130-085-13-05 3300 XL 8mm Probe Sensor Extension Cable
Bently Nevada 330130-085-03-05 3300 XL Standard Extension Cable
Bently Nevada 330130-085-01-00 3300 XL Standard Extension Cable
Bently Nevada 330130-085-00-CN 3300 XL Standard Extension Cable
Bently Nevada 330130-085-00-05 3300 XL Standard Extension Cable
Bently Nevada 330130-085-00-00 3300 XL 8 mm Extension Cable
Bently Nevada 330130-080-02-00 3300 XL Extension Cable
Bently Nevada 330130-080-01-CN 3300 XL Standard Extension Cable
Bently Nevada 330130-080-01-00 3300 XL Extension Cable
Bently Nevada 330130-080-00-CN 3300 XL Standard Extension Cable
Bently Nevada 330130-080-00-05 3300 XL Extension Cable

Email : sales@amikon.cn  

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Related Products

Bently Nevada 3500/22M 138607-01 Transient Data Interface Module
Bently Nevada 3500/22M 138607-01 Transient Data Interface Module

The 3500/22M 138607-01 Transient Data Interface (TDI)   is the interface between the 3500 monitoring system and   compatible software (System 1 Condition Monitoring   and Diagnostic software and 3500 System Configuration   software). The TDI combines the function of a 3500/20   Rack Interface Module (RIM) with the data collection   capability of a communication processor such as TDXnet.

Bently Nevada 3500/22M 288055-01 Transient Data Interface
Bently Nevada 3500/22M 288055-01 Transient Data Interface

3500/22M is a Transient Data Interface Module manufactured and designed by Bently Nevada as part of the 3500 Series used for monitoring seismic activity. The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet.

Bently Nevada 3500/33 149986-01 16-Channel Relay Module
Bently Nevada 3500/33 149986-01 16-Channel Relay Module

The 3500/33 16-Channel Relay Module is a full-height module   that provides 16 relay outputs. You can place any number of   16-channel relay modules in any of the slots to the right of the   Transient Data Interface (TDI) Module.   Each output of the 3500/33 16-Channel Relay Module can be   independently programmed to perform voting logic.

Bently Nevada 3500/60 163179-01 Temperature Monitor Module
Bently Nevada 3500/60 163179-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The modules condition these inputs and   compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/60 133811-01 Temperature Monitor Module
Bently Nevada 3500/60 133811-01 Temperature Monitor Module

The 3500/60 & 61 modules provide six channels of   temperature monitoring and accept both Resistance   Temperature Detector (RTD) and Thermocouple (TC)   temperature inputs.  The 3500/60 133811-01 modules condition   these inputs and compare them against user-programmable alarm setpoints.    The 3500/60 and 3500/61 provide identical functionality   except that the 3500/61 provides recorder outputs for each of   its six channels while the 3500/60 does not.

Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor
Bently Nevada 3500/72M 176449-08 Recip Rod Position Monitor

The 3500/72M Recip Rod Position Monitor meets API 618   requirements for reciprocating compressors. It measures:   l Rod position   l Rod drop   l Hyper-compressor   The four-channel 3500/72M Recip Rod Position Monitor   accepts input from proximity transducers, conditions the   signal to provide dynamic and static position measurements,   and compares the conditioned signals with userprogrammable alarms.   Each channel, depending on how you configure it, typically   conditions its input signal to generate various parameters   called measured values.

Bently Nevada 3500/62 163179-03 Process Variable Monitor
Bently Nevada 3500/62 163179-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Bently Nevada 3500/62 133811-03 Process Variable Monitor
Bently Nevada 3500/62 133811-03 Process Variable Monitor

The 3500/62 Process Variable Monitor is a 6-channel monitor   for processing machine critical parameters that merit   continuous monitoring, such as pressures, flows,   temperatures, and levels. The monitor accepts +4 to +20 mA   current inputs or any proportional voltage inputs between -10   Vdc and +10 Vdc. It conditions these signals and compares   the conditioned signals to user-programmable alarm   setpoints. 

Quality | Reliability | Integrity

More than 40.000.000 products available and worldwide support

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

whatsApp

contact